Return-Path: Received: from plane.gmane.org (plane.gmane.org [80.91.229.3]) by yocto-www.yoctoproject.org (Postfix) with ESMTP id 74853E0162E for ; Sat, 16 Nov 2013 09:50:12 -0800 (PST) Received: from list by plane.gmane.org with local (Exim 4.69) (envelope-from ) id 1Vhk0R-00061G-C8 for yocto@yoctoproject.org; Sat, 16 Nov 2013 18:50:03 +0100 Received: from 212.50.246.122 ([212.50.246.122]) by main.gmane.org with esmtp (Gmexim 0.1 (Debian)) id 1AlnuQ-0007hv-00 for ; Sat, 16 Nov 2013 18:50:03 +0100 Received: from lemonjack05 by 212.50.246.122 with local (Gmexim 0.1 (Debian)) id 1AlnuQ-0007hv-00 for ; Sat, 16 Nov 2013 18:50:03 +0100 X-Injected-Via-Gmane: http://gmane.org/ To: yocto@yoctoproject.org From: Jack lemon Date: Sat, 16 Nov 2013 15:24:57 +0000 (UTC) Message-ID: Mime-Version: 1.0 X-Complaints-To: usenet@ger.gmane.org X-Gmane-NNTP-Posting-Host: sea.gmane.org User-Agent: Loom/3.14 (http://gmane.org/) X-Loom-IP: 212.50.246.122 (Mozilla/5.0 (X11; Ubuntu; Linux x86_64; rv:21.0) Gecko/20100101 Firefox/21.0) Subject: How to modify u-boot in Root File System rootfs.ext2.gz.u-boot ? X-BeenThere: yocto@yoctoproject.org X-Mailman-Version: 2.1.13 Precedence: list List-Id: Discussion of all things Yocto Project List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 16 Nov 2013 17:50:13 -0000 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Hi everybody, I worked with P1022DS-PB and then designed my custom board according to its documents. For sd card I adjust u-boot to 115200 baud rate and compile it with ELDK independently. However in Nor-flash we haven't u-boot.bin independently. For Nor-Flash I need to adjust baud rate in .ext2.gz.u-boot image, because for Nor-Flash only kernel,rootfs,dtb files are needed. How can I modify u-boot in fsl-image-minimal-p1022ds.ext2.gz.u-boot for adjusting baud rate to 115200?