Return-Path: Received: from plane.gmane.org (plane.gmane.org [80.91.229.3]) by yocto-www.yoctoproject.org (Postfix) with ESMTP id EDFCDE004FF for ; Tue, 19 Nov 2013 01:59:44 -0800 (PST) Received: from list by plane.gmane.org with local (Exim 4.69) (envelope-from ) id 1Vii5r-0007V8-7n for yocto@yoctoproject.org; Tue, 19 Nov 2013 10:59:39 +0100 Received: from 78.157.37.205 ([78.157.37.205]) by main.gmane.org with esmtp (Gmexim 0.1 (Debian)) id 1AlnuQ-0007hv-00 for ; Tue, 19 Nov 2013 10:59:39 +0100 Received: from lemonjack05 by 78.157.37.205 with local (Gmexim 0.1 (Debian)) id 1AlnuQ-0007hv-00 for ; Tue, 19 Nov 2013 10:59:39 +0100 X-Injected-Via-Gmane: http://gmane.org/ To: yocto@yoctoproject.org From: Jack Lemon Date: Tue, 19 Nov 2013 09:59:18 +0000 (UTC) Message-ID: References: <528B27C0.5060901@denx.de> Mime-Version: 1.0 X-Complaints-To: usenet@ger.gmane.org X-Gmane-NNTP-Posting-Host: sea.gmane.org User-Agent: Loom/3.14 (http://gmane.org/) X-Loom-IP: 78.157.37.205 (Mozilla/5.0 (Windows NT 5.1; rv:25.0) Gecko/20100101 Firefox/25.0) Subject: Re: How to modify u-boot in Root File System rootfs.ext2.gz.u-boot ? X-BeenThere: yocto@yoctoproject.org X-Mailman-Version: 2.1.13 Precedence: list List-Id: Discussion of all things Yocto Project List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 19 Nov 2013 09:59:45 -0000 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Stefano Babic writes: > Is it not enough to add SERIAL_CONSOLE = "115200 ttyS0" (or which serial > you use as console) to your machine conf ? > > Best regards, > Stefano Babic > Thank you Stefano for your reply. Does it not any need to edit u-boot source code? just adding SERIAL_CONSOLE = "115200 ttyS0" to local.conf?