From: Sangilikumar Subject: Re: wm8974 and sam9g45 atmel Date: Fri, 11 Jul 2014 06:01:41 +0000 (UTC) Message-ID: References: <4DF0E2B4.7040401@ecsproject.com> <20110610103118.GA26441@sirena.org.uk> <4DFB1CEA.2060308@ecsproject.com> <4DFB6CA5.9010202@ecsproject.com> <20110624120943.GG9483@opensource.wolfsonmicro.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: Received: from plane.gmane.org (plane.gmane.org [80.91.229.3]) by alsa0.perex.cz (Postfix) with ESMTP id BF90C264F3D for ; Fri, 11 Jul 2014 08:01:53 +0200 (CEST) Received: from list by plane.gmane.org with local (Exim 4.69) (envelope-from ) id 1X5Tu4-0000wT-Cr for alsa-devel@alsa-project.org; Fri, 11 Jul 2014 08:01:52 +0200 Received: from 115.114.95.155.static-Chennai.vsnl.net.in ([115.114.95.155.static-Chennai.vsnl.net.in]) by main.gmane.org with esmtp (Gmexim 0.1 (Debian)) id 1AlnuQ-0007hv-00 for ; Fri, 11 Jul 2014 08:01:52 +0200 Received: from sangilikumar.muniyandi by 115.114.95.155.static-Chennai.vsnl.net.in with local (Gmexim 0.1 (Debian)) id 1AlnuQ-0007hv-00 for ; Fri, 11 Jul 2014 08:01:52 +0200 List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: alsa-devel-bounces@alsa-project.org Sender: alsa-devel-bounces@alsa-project.org To: alsa-devel@alsa-project.org List-Id: alsa-devel@alsa-project.org Mark Brown opensource.wolfsonmicro.com> writes: > > On Fri, Jun 17, 2011 at 05:03:01PM +0200, Michele Da Rold wrote: > > > it's better to use wm8974 like master? because I have see that the > > atmel ssc is not so good generating clocks.... > > Probably in your system, yes. The most important thing from an audio > performance point of view is that the clocks are all derived from the > same clock source - if this is like other Atmel systems then you need to > make the CODEC clock master on the audio bus as the MCLK output from the > CPU is not synchronous with the audio clocks. > Me too working with WM8974 codec and integrating with AM1808 processor but i while i'm playing i can't hear the sound from speaker. Configured the WM8974 as slave and connected the MCLK with 24.5MHz crystal. I can probe the signal at WCLK,BCLK and MCLK while playing audio but can't hear the sound from speaker. My modified machine driver is #define AUDIO_FORMAT (SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBS_CFS ) static int evm_hw_params(struct snd_pcm_substream *substream, struct snd_pcm_hw_params *params) { struct snd_soc_pcm_runtime *rtd = substream->private_data; struct snd_soc_dai *codec_dai = rtd->codec_dai; struct snd_soc_dai *cpu_dai = rtd->cpu_dai; int ret = 0; unsigned sysclk; /* ASP1 on DM355 EVM is clocked by an external oscillator */ if (machine_is_davinci_dm355_evm() || machine_is_davinci_dm6467_evm() || machine_is_davinci_dm365_evm()) sysclk = 27000000; /* ASP0 in DM6446 EVM is clocked by U55, as configured by * board-dm644x-evm.c using GPIOs from U18. There are six * options; here we "know" we use a 48 KHz sample rate. */ if (machine_is_omapl138_lcdkboard()) sysclk = 24576000; else return -EINVAL; /* set codec DAI configuration */ ret = snd_soc_dai_set_fmt(codec_dai, AUDIO_FORMAT); if (ret < 0) return ret; /* set cpu DAI configuration */ ret = snd_soc_dai_set_fmt(cpu_dai, AUDIO_FORMAT); if (ret < 0) return ret; ret = snd_soc_dai_set_pll(codec_dai, 0, 1, 24576000,0); if (ret) { printk( ">>>couldn't set pll: %d\n", ret); return ret; } return 0; } static int evm_spdif_hw_params(struct snd_pcm_substream *substream, struct snd_pcm_hw_params *params) { struct snd_soc_pcm_runtime *rtd = substream->private_data; struct snd_soc_dai *cpu_dai = rtd->cpu_dai; /* set cpu DAI configuration */ return snd_soc_dai_set_fmt(cpu_dai, AUDIO_FORMAT); } /* * Since da850_sdi_shutdown() and da850_sdi_trigger() are invoked in interrupt * context, they can't directly invoke da850_sdi_mute(), since da850_sdi_mute() * involves i2c communications (which is slow and can wait). So, use the workqueue * mechanism to 'finish' processing. */ #ifdef CONFIG_MACH_DAVINCI_DA850_SDI extern int da850_sdi_mute(int state); static void muteTheOutputs( struct work_struct * work ) { da850_sdi_mute( 1 ); } DECLARE_WORK( muteWorkElement, muteTheOutputs ); static void unmuteTheOutputs( struct work_struct * work ) { da850_sdi_mute( 0 ); } DECLARE_WORK( unmuteWorkElement, unmuteTheOutputs ); static int da850_sdi_trigger(struct snd_pcm_substream *stream, int cmd) { switch (cmd) { case SNDRV_PCM_TRIGGER_START: case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: case SNDRV_PCM_TRIGGER_RESUME: schedule_work( &unmuteWorkElement ); break; case SNDRV_PCM_TRIGGER_STOP: case SNDRV_PCM_TRIGGER_PAUSE_PUSH: case SNDRV_PCM_TRIGGER_SUSPEND: schedule_work( &muteWorkElement ); break; } return 0; } static struct snd_soc_ops da850_sdi_ops = { .hw_params = evm_hw_params, .trigger = da850_sdi_trigger }; #endif static struct snd_soc_ops evm_ops = { .hw_params = evm_hw_params, }; static struct snd_soc_ops evm_spdif_ops = { .hw_params = evm_spdif_hw_params, }; static const struct snd_soc_dapm_widget aic3x_dapm_widgets[] = { SND_SOC_DAPM_MIC("Mic Jack", NULL), SND_SOC_DAPM_SPK("Ext Spk", NULL), }; /* davinci-evm machine audio_mapnections to the codec pins */ static const struct snd_soc_dapm_route audio_map[] = { /* Speaker output mixer */ {"Speaker Mixer", "PCM Playback Switch", "DAC"}, {"Speaker Mixer", "Aux Playback Switch", "Aux Input"}, {"Speaker Mixer", "Line Bypass Switch", "Boost Mixer"}, /* speaker connected to SPKOUTP */ {"SpkN Out", NULL, "Speaker Mixer"}, {"SpkP Out", NULL, "Speaker Mixer"}, {"SPKOUTN", NULL, "SpkN Out"}, {"SPKOUTP", NULL, "SpkP Out"}, /* Input PGA */ {"Input PGA", "Aux Switch", "Aux Input"}, {"Input PGA", "MicN Switch", "MICN"}, {"Input PGA", "MicP Switch", "MICP"}, }; /* Logic for a aic3x as connected on a davinci-evm */ static int evm_aic3x_init(struct snd_soc_pcm_runtime *rtd) { struct snd_soc_codec *codec = rtd->codec; struct snd_soc_dapm_context *dapm = &codec->dapm; /* Add davinci-evm specific widgets */ snd_soc_dapm_new_controls(dapm, aic3x_dapm_widgets, ARRAY_SIZE(aic3x_dapm_widgets)); /* Set up davinci-evm specific audio path audio_map */ snd_soc_dapm_add_routes(dapm, audio_map, ARRAY_SIZE(audio_map)); snd_soc_dapm_enable_pin(dapm, "Ext Spk"); return 0; } static struct snd_soc_card da850_snd_soc_card = { .name = "DA850/OMAP-L138 EVM", .owner = THIS_MODULE, .dai_link = &da850_evm_dai, .num_links = 1, }; static struct platform_device *evm_snd_device; static int __init evm_init(void) { struct snd_soc_card *evm_snd_dev_data; int index; int ret; if (machine_is_omapl138_lcdkboard()) { printk("LCDK HAWK board"); evm_snd_dev_data = &da850_snd_soc_card; index = 0; } else return -EINVAL; evm_snd_device = platform_device_alloc("soc-audio", index); if (!evm_snd_device) return -ENOMEM; platform_set_drvdata(evm_snd_device, evm_snd_dev_data); ret = platform_device_add(evm_snd_device); if (ret) platform_device_put(evm_snd_device); return ret; } static void __exit evm_exit(void) { platform_device_unregister(evm_snd_device); } module_init(evm_init); module_exit(evm_exit); root@omapl138-lcdk:~# amixer cset numid=61 1 numid=61,iface=MIXER,name='Speaker Mixer PCM Playback Switch' ; type=BOOLEAN,access=rw------,values=1 : values=on root@omapl138-lcdk:~# amixer cset numid=46,iface=MIXER,name='Speaker Playback Vo lume' 63 numid=46,iface=MIXER,name='Speaker Playback Volume' ; type=INTEGER,access=rw---R--,values=1,min=0,max=63,step=0 : values=63 | dBscale-min=-57.00dB,step=1.00dB,mute=0 Please help me to solve this problem.