Content-Type: multipart/mixed; boundary="===============2631763671322226429==" MIME-Version: 1.0 From: Bo Subject: basic connection howto Date: Tue, 01 Sep 2015 19:34:48 +0000 Message-ID: List-Id: To: ofono@ofono.org --===============2631763671322226429== Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: quoted-printable Hi, Seems that there takes some fiddling to connect = my cellular dongle to the ofono framework. My issue is i quickly looked at the man pages = to see how to create the link between = ofono my device. The man pages mention that: = "oFono is controlled through D-Bus; = for example, one can tell ofonod to send = AT commands over /dev/rfcomm0 by calling = the D-Bus method org.ofono.at.Manager.Create" So as any developer would do, I built my dbus command: dbus-send --system --print-reply = --dest=3Dorg.ofono / org.ofono.at.Manager.Create string:"dev:/dev/ttyUSB0" string:"at" I had already done my typical marshalling of my device like so: usb_modeswitch -v 1199 -p 0025 rmmod usbserial modprobe usbserial vendor=3D0x1199 product=3D0x0025 which correspond to the sierra-wireless 598u HOWEVER, there is no command called org.ofono.at.Manager.Create. = I quickly see that the man page was created in 2009... Quickly peeking through the test scripts = I don't find anything that sounds familiar, = took a peek in list-modems and enable-modem.... = Also there is no examples to find in the docs to follow. I also have conman installed, but not really sure who does what here. = Who is controlling the device? = Where do i give someone my = golden /dev/ttyUSB0 string so it all magically works? Thanks all! Bo --===============2631763671322226429==--