From: Detlev Zundel Date: Wed, 05 Sep 2007 12:54:42 +0200 Subject: [U-Boot-Users] Enabling Cache in MPC5200 In-Reply-To: <18006748.3362451188893499288.JavaMail.nabble@isper.nabble.com> (santoshguru@yahoo.com's message of "Tue\, 04 Sep 2007 01\:11\:39 -0700") References: <18006748.3362451188893499288.JavaMail.nabble@isper.nabble.com> Message-ID: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi San, > I am using a LITE5200 evaluation board, and am not able to enable the cache. > The execution hangs in these calls. > void EnableInstCache(void) > { [...] > } > > void EnableDataCache(void) > { [...] > } > What could be the problem? It might be one of our favourites, i.e. wrong ram initialization. When enabling the caches, the CPU generates burst accesses for the first time. It is pretty common (on this mailing list) that not quite correctly initialized RAM works for single beat but fails for bursts. So my advice would be to check the RAM init. Is is really a standard lite5200 board that you use? Cheers Detlev -- The best way to predict the future is to invent it. -- Alan Kay -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-40 Fax: (+49)-8142-66989-80 Email: dzu at denx.de