From: Thierry Vignaud Subject: Re: Error: firmware not found Date: Tue, 25 Jan 2005 14:19:39 +0100 Message-ID: References: Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: In-Reply-To: (Giuliano Pochini's message of "Tue, 25 Jan 2005 09:32:27 +0100 (CET)") Sender: alsa-devel-admin@lists.sourceforge.net Errors-To: alsa-devel-admin@lists.sourceforge.net List-Unsubscribe: , List-Post: List-Help: List-Subscribe: , List-Archive: To: Giuliano Pochini Cc: Alsa-devel List-Id: alsa-devel@alsa-project.org Giuliano Pochini writes: > > > This is not good because some cards (in my case the Layla3G and > > > the Gina3G) have the same PCI card, but different external > > > module. > > > > you mean that you've one of this card and that hotplug loads the > > wrong module ? > > Yes. > > > if yes, this is a driver bug indeed. > > No, it isn't, because those devices use the same PCI card, that is > the kernel reports the same PCI ID/subID's. The driver has to load > the firmware and then it asks the DSP what (if any) external box is > attached. If it is the wrong driver it exits with -ENODEV. :-( are these cards rare or not? b/c this is a big issue for hw auto configuring (eg as we do in mandrakelinux). would it be possible to create a snd-echoaudio frontend driver that would try sub-drivers (gina*, layla*, ...) which would load the firmware & ask DSP ? this what they do for some dvb cards. this would save distro :-) ------------------------------------------------------- This SF.Net email is sponsored by: IntelliVIEW -- Interactive Reporting Tool for open source databases. Create drag-&-drop reports. Save time by over 75%! Publish reports on the web. Export to DOC, XLS, RTF, etc. Download a FREE copy at http://www.intelliview.com/go/osdn_nl