From: andersvi@extern.uio.no Subject: Re: vxpocket 440 with alsa, problems with vxloader Date: Sat, 15 Jan 2005 00:36:03 +0100 Message-ID: References: Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: In-Reply-To: (Takashi Iwai's message of "Fri, 14 Jan 2005 15:46:17 +0100") Sender: alsa-devel-admin@lists.sourceforge.net Errors-To: alsa-devel-admin@lists.sourceforge.net List-Unsubscribe: , List-Post: List-Help: List-Subscribe: , List-Archive: To: Takashi Iwai Cc: alsa-user@lists.sourceforge.net, alsa-devel@lists.sourceforge.net List-Id: alsa-devel@alsa-project.org >>>>> "TI" == Takashi Iwai writes: TI> Does your kernel support hotplug firmware loader (CONFIG_FW_LOADER)? TI> And is hotplug working? TI> Check whether /proc/asound/devices whether you have a "[1-0] hardware TI> dependent device". If you have it, the hotplug firmware loader isn't TI> enabled. Use vxloader, run "vxloader -c1". Theres no such line there now. It was earlier today though... Hmmm Sticking in the card now leaves the following trail in /var/log/messages: Jan 15 00:25:34 localhost kernel: cs: memory probe 0xa0000000-0xa0ffffff: clean. Jan 15 00:25:34 localhost cardmgr[2616]: socket 0: Digigram VX-POCKET440 Jan 15 00:25:35 localhost kernel: snd-vxp440: RequestIO: Resource in use Jan 15 00:25:35 localhost cardmgr[2616]: get dev info on socket 0 failed: No such device and "/sbin/lsmod | grep vx" shows a list of snd_vxp440 and friends. However, theres no trace inside /proc/asound/cards or any /proc/asound/card1/ directory, and i cant find the card anywhere else. $ amixer -c 1 amixer: Mixer attach hw:1 error: No such device TI> With the attached patch, you can check whether the firmware is loaded TI> or not via the proc file. Which proc file are you suggesting here? ------------------------------------------------------- The SF.Net email is sponsored by: Beat the post-holiday blues Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek. It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt