From: asnua at eircom.net Date: Tue, 24 Feb 2004 18:44:29 +0000 Subject: [U-Boot-Users] U-Boot and S3c2410 Message-ID: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Wolfgang/Gerrit/Matt, Thanks for your help.... I think that I finally figured out how to boot the kernel. I looked at the definitions for ZTEXTADDR and ZRELADDR and found that they were at 0x30008000. So I made my load and entry points to be that address. I then offset my tftp address so that it would not overwrite 0x30008000. Unfortunately, it dies after I get the message... Uncompressing Linux.... done, booting the kernel. SMDK2410 # tftpboot 30a00000 myzImage.img TFTP from server 192.xxx.xx.xx; our IP address is 192.xxx.xx.xx Filename 'myzImage.img'. Load address: 0x30a00000 Loading: ################################################################# ################################################################# done Bytes transferred = 662556 (a1c1c hex) SMDK2410 # bootm ## Booting image at 30a00000 ... Image Name: 2.4.18 kernel Created: 2004-02-24 17:33:16 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 662492 Bytes = 647 kB Load Address: 30008000 Entry Point: 30008000 Verifying Checksum ... OK OK Starting kernel ... Uncompressing Linux................................................ done, bootin g the kernel.