From: Matan Ziv-Av Date: Tue, 7 Dec 2010 12:01:34 +0100 Subject: [PATCH 04/15] Only delay boot if keyboard open Message-ID: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de --- board/nokia/rx51/rx51.c | 7 +++++++ include/configs/nokia_rx51.h | 1 + 2 files changed, 8 insertions(+), 0 deletions(-) diff --git a/board/nokia/rx51/rx51.c b/board/nokia/rx51/rx51.c index 3149a79..347d08a 100644 --- a/board/nokia/rx51/rx51.c +++ b/board/nokia/rx51/rx51.c @@ -104,6 +104,13 @@ int misc_init_r(void) setenv("nolo_atagaddr", buf); #endif + // set environment variable slide_sw + // if keyboard slide is open/close + omap_set_gpio_direction(71, 1); + unsigned val = omap_get_gpio_datain(71); + omap_free_gpio(71); + setenv("slide_sw", val ? "close" : "open"); + dieid_num_r(); return 0; diff --git a/include/configs/nokia_rx51.h b/include/configs/nokia_rx51.h index 45b942a..5c3b068 100644 --- a/include/configs/nokia_rx51.h +++ b/include/configs/nokia_rx51.h @@ -200,6 +200,7 @@ int rx51_kp_getc(void); "bootm ${nolo_kernaddr}\0" #define CONFIG_PREBOOT \ + "if test $slide_sw != open ; then run noloboot; fi ;" \ "echo Extra commands:;" \ "echo run sercon - Use serial port for control.;" \ "echo run usbcon - Use usbtty for control.;" \ -- 1.7.4.1 --nextPart1511561.nRVgJThL9n Content-Disposition: attachment; filename="0005-Change-Wireless-LAN-mode-from-M4-to-M0.patch" Content-Transfer-Encoding: 7Bit Content-Type: text/x-patch; charset="UTF-8"; name="0005-Change-Wireless-LAN-mode-from-M4-to-M0.patch"