From: s.hauer@pengutronix.de (Sascha Hauer) Date: Mon, 30 Nov 2009 13:31:29 +0100 Subject: [PATCH] i.MX27 audmux: Fix register offsets Message-ID: To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org The PPCR registers start at 0x10, not 0xc. Fix this. Signed-off-by: Sascha Hauer --- arch/arm/plat-mxc/include/mach/audmux.h | 6 +++--- 1 files changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/arm/plat-mxc/include/mach/audmux.h b/arch/arm/plat-mxc/include/mach/audmux.h index 5cd6466..dcc12d4 100644 --- a/arch/arm/plat-mxc/include/mach/audmux.h +++ b/arch/arm/plat-mxc/include/mach/audmux.h @@ -4,9 +4,9 @@ #define MX27_AUDMUX_HPCR1_SSI0 0 #define MX27_AUDMUX_HPCR2_SSI1 1 #define MX27_AUDMUX_HPCR3_SSI_PINS_4 2 -#define MX27_AUDMUX_PPCR1_SSI_PINS_1 3 -#define MX27_AUDMUX_PPCR2_SSI_PINS_2 4 -#define MX27_AUDMUX_PPCR3_SSI_PINS_3 5 +#define MX27_AUDMUX_PPCR1_SSI_PINS_1 4 +#define MX27_AUDMUX_PPCR2_SSI_PINS_2 5 +#define MX27_AUDMUX_PPCR3_SSI_PINS_3 6 #define MX31_AUDMUX_PORT1_SSI0 0 #define MX31_AUDMUX_PORT2_SSI1 1 -- 1.6.5.2 -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |