From: leochen@broadcom.com (Leo Chen) Date: Fri, 9 Oct 2009 10:22:20 -0700 Subject: [PATCH] bcmring: add gpio support Message-ID: To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org add gpio headers in include/mach Signed-off-by: Leo Hao Chen --- arch/arm/mach-bcmring/include/mach/gpio.h | 22 ++++ arch/arm/mach-bcmring/include/mach/gpio_defs.h | 102 ++++++++++++++++++ arch/arm/mach-bcmring/include/mach/gpio_irq.h | 61 +++++++++++ arch/arm/mach-bcmring/include/mach/gpio_types.h | 52 +++++++++ arch/arm/mach-bcmring/include/mach/reg_gpio.h | 131 +++++++++++++++++++++++ 5 files changed, 368 insertions(+), 0 deletions(-) create mode 100644 arch/arm/mach-bcmring/include/mach/gpio.h create mode 100644 arch/arm/mach-bcmring/include/mach/gpio_defs.h create mode 100644 arch/arm/mach-bcmring/include/mach/gpio_irq.h create mode 100644 arch/arm/mach-bcmring/include/mach/gpio_types.h create mode 100644 arch/arm/mach-bcmring/include/mach/reg_gpio.h diff --git a/arch/arm/mach-bcmring/include/mach/gpio.h b/arch/arm/mach-bcmring/include/mach/gpio.h new file mode 100644 index 0000000..e557b08 --- /dev/null +++ b/arch/arm/mach-bcmring/include/mach/gpio.h @@ -0,0 +1,22 @@ +/***************************************************************************** +* Copyright 2003 - 2008 Broadcom Corporation. All rights reserved. +* +* Unless you and Broadcom execute a separate written software license +* agreement governing use of this software, this software is licensed to you +* under the terms of the GNU General Public License version 2, available at +* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). +* +* Notwithstanding the above, under no circumstances may you combine this +* software in any way with any other Broadcom software provided under a +* license other than the GPL, without Broadcom's express prior written +* consent. +*****************************************************************************/ + +#if !defined(ASM_ARCH_GPIO_H) +#define ASM_ARCH_GPIO_H + +/* We put thre real stuff in reg_gpio.h for backwards compatability */ + +#include + +#endif /* ASM_ARCH_GPIO_H */ diff --git a/arch/arm/mach-bcmring/include/mach/gpio_defs.h b/arch/arm/mach-bcmring/include/mach/gpio_defs.h new file mode 100644 index 0000000..164cc46 --- /dev/null +++ b/arch/arm/mach-bcmring/include/mach/gpio_defs.h @@ -0,0 +1,102 @@ +/***************************************************************************** +* Copyright 2004 - 2008 Broadcom Corporation. All rights reserved. +* +* Unless you and Broadcom execute a separate written software license +* agreement governing use of this software, this software is licensed to you +* under the terms of the GNU General Public License version 2, available at +* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). +* +* Notwithstanding the above, under no circumstances may you combine this +* software in any way with any other Broadcom software provided under a +* license other than the GPL, without Broadcom's express prior written +* consent. +*****************************************************************************/ + +/* +** GPIO pin definitions +** +** This file must contain only defines as it is shared between user and kernel space. +** As such, it is placed in the linux/broadcom/bcmring directory so it can be exposed +** using install-headers. It can not be in the asm/arch directory. +*/ + +#ifndef GPIO_DEFS_H +#define GPIO_DEFS_H + +/* ---- Include Files ----------------------------------------------------- */ +/* ---- Public Constants and Types ---------------------------------------- */ + +/* BCMRING GPIO pins */ +typedef enum { + GPIO00_SCL_MTX_X0_EPHYLED_DATA = 0, + GPIO01_SDA_MTX_X1_EPHYLED_CLK, + GPIO02_UART0_DTR_B_MTX_X2_SDIO0D4_PCM1DO_I2S1DO_ETM18_VPMTDI, + GPIO03_UART0_DCD_B_MTX_X3_SDIO0D5_PCM1DI_I2S1DI_ETM19_VPMTDO, + GPIO04_UART0_RI_B_MTX_X4_SDIO0D6_PCM1CLK_I2S1BCLK_ETM20_VPMTMS, + GPIO05_UART0_DSR_B_MTX_X5_SDIO0D7_PCM1FS_I2S1LRCOUT_ETM21_VPMTCK, + GPIO06_MTX_X6_SDIO1D2_ETM22, + GPIO07_MTX_X7_SDIO1D3_ETM23, + GPIO08_MTX_X8_PCM0FS_I2S0LRCOUT, + GPIO09_MTX_X9_PCM0DI_I2S0DI, + GPIO10_MTX_X10_SDIO1CMD_ETM16, + GPIO11_MTX_X11_SDIO1CLK_ETM17, + GPIO12_UART1_CTS_B, + GPIO13_UART1_RTS_B, + GPIO14_UART1_TXD, + GPIO15_UART1_RXD, + GPIO16_MTX_Y0_MTX_SCAN_DA_ETM26, + GPIO17_MTX_Y1_MTX_SCAN_CLK_ETM27, + GPIO18_MTX_Y2_SDIO0D2_ETM28, + GPIO19_MTX_Y3_SDIO0D3_ETM29, + GPIO20_SPI_SS2_B_MTX_Y4_SDIO0SDCD_B_ETM24, + GPIO21_SPI_SS1_B_MTX_Y5_SDIO0WP_ETM25, + GPIO22_SPI_MISO, + GPIO23_SPI_CLK, + GPIO24_SPI_MOSI, + GPIO25_SPI_SS0_B, + GPIO26_I2S1MCLK, + GPIO27_SDIO1D0_ETM30, + GPIO28_SDIO1D1_ETM31, + GPIO29_SDIO0CMD, + GPIO30_SDIO0CLK, + GPIO31_SDIO0D0, + GPIO32_SDIO0D1, + GPIO33_PCM0CLK_I2S0BCLK, + GPIO34_PCM0D0_I2S0DO, + GPIO35_PWM_OUT, + GPIO36_USB0_PWRON, + GPIO37_USB0_PWRFLT, + GPIO38_SDA_V2_SPI_V2, + GPIO39_SCL_V2_SPI_CLK_V2, + GPIO40_PIF_HRDY_2_SPI_MOSI_V2, + GPIO41_SPI_SS2_B_V2, + GPIO42_PIF_HAT2, + GPIO43_KEY_IN0_UART0_CTS_B_I2S0LRCIN_ETMCTL, + GPIO44_KEY_IN1_UART0_RTS_B_I2S1LRCIN_ETMCLK_VPMRTCK, + GPIO45_KEY_IN2_ETM0_I2S0MCLK, + GPIO46_KEY_IN3_ETM1, + GPIO47_KEY_IN4_ETM2, + GPIO48_KEY_IN5_ETM3, + GPIO49_KEY_IN6_SSCL_ETM4, + GPIO50_KEY_IN7_SSDA_ETM5, + GPIO51_KEY_IN8_SPIS_MISO_ETM6, + GPIO52_KEY_OUT0_ETM7, + GPIO53_KEY_OUT1_ETM8, + GPIO54_KEY_OUT2_ETM9, + GPIO55_KEY_OUT3_SPIS_CLK_ETM10, + GPIO56_KEY_OUT4_SPIS_MOSI_ETM11, + GPIO57_KEY_OUT5_SPIS_SSN_ETM12_EXTPHY_MDC, + GPIO58_KEY_OUT6_ETM13_EXTPHY_MDIO, + GPIO59_KEY_OUT7_ETM14_USB1_PWRON, + GPIO60_KEY_OUT8_ETM15_USB1_PWRFLT, + gpio_defs_MAX_PINS +} gpio_defs_e; + +/* Max in and out keys indexes */ +#define GPIO_MAX_INKEY_IDX 9 +#define GPIO_MAX_OUTKEY_IDX 9 + +/* ---- Public Variables -------------------------------------------------- */ +/* ---- Public Function Prototypes ---------------------------------------- */ + +#endif /* GPIO_DEFS_H */ diff --git a/arch/arm/mach-bcmring/include/mach/gpio_irq.h b/arch/arm/mach-bcmring/include/mach/gpio_irq.h new file mode 100644 index 0000000..08a74f7 --- /dev/null +++ b/arch/arm/mach-bcmring/include/mach/gpio_irq.h @@ -0,0 +1,61 @@ +/***************************************************************************** +* Copyright 2004 - 2008 Broadcom Corporation. All rights reserved. +* +* Unless you and Broadcom execute a separate written software license +* agreement governing use of this software, this software is licensed to you +* under the terms of the GNU General Public License version 2, available at +* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). +* +* Notwithstanding the above, under no circumstances may you combine this +* software in any way with any other Broadcom software provided under a +* license other than the GPL, without Broadcom's express prior written +* consent. +*****************************************************************************/ + +/* +* +***************************************************************************** +* +* gpio_irq.h +* +* PURPOSE: +* +* This file defines the architecture-independent kernel API for the GPIO +* IRQ driver. This allows clients to register ISR handlers that are +* triggered by external interrupts on GPIO lines. +* +* NOTES: +* +*****************************************************************************/ + +#if !defined(LINUX_GPIO_IRQ_H) +#define LINUX_GPIO_IRQ_H + +#if defined(__KERNEL__) + +/* ---- Include Files ---------------------------------------------------- */ + +#include +#include + +/* ---- Constants and Types ---------------------------------------------- */ + +typedef void *GPIO_IRQ_DATA; +typedef irqreturn_t(*GPIO_IRQ_HANDLER) (GPIO_IRQ_DATA); + +/* + * ---- Variable Externs ------------------------------------------------- + * ---- Function Prototypes ---------------------------------------------- + */ + +int gpio_request_irq + (int pin, + GPIO_INTERRUPT_TYPE interruptType, + GPIO_IRQ_HANDLER irqHandler, void *devId); + +int gpio_free_irq(int pin); +int gpio_enable_irq(int pin); +int gpio_disable_irq(int pin); + +#endif /* __KERNEL__ */ +#endif /* LINUX_GPIO_IRQ_H */ diff --git a/arch/arm/mach-bcmring/include/mach/gpio_types.h b/arch/arm/mach-bcmring/include/mach/gpio_types.h new file mode 100644 index 0000000..36ac064 --- /dev/null +++ b/arch/arm/mach-bcmring/include/mach/gpio_types.h @@ -0,0 +1,52 @@ +/***************************************************************************** +* Copyright 2004 - 2008 Broadcom Corporation. All rights reserved. +* +* Unless you and Broadcom execute a separate written software license +* agreement governing use of this software, this software is licensed to you +* under the terms of the GNU General Public License version 2, available at +* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). +* +* Notwithstanding the above, under no circumstances may you combine this +* software in any way with any other Broadcom software provided under a +* license other than the GPL, without Broadcom's express prior written +* consent. +*****************************************************************************/ + +/* +* +***************************************************************************** +* +* gpio_types.h +* +* PURPOSE: +* +* This file defines generic types used by the GPIO and GPIO IRQ driver. +* +* NOTES: +* +*****************************************************************************/ + +#if !defined(LINUX_GPIO_TYPES_H) +#define LINUX_GPIO_TYPES_H + +/* + * ---- Include Files ---------------------------------------------------- + * ---- Constants and Types ---------------------------------------------- + */ + +typedef enum { + GPIO_NO_INTERRUPT = 0x00, + GPIO_RISING_EDGE_INTERRUPT_TRIGGER = 0x01, + GPIO_FALLING_EDGE_INTERRUPT_TRIGGER = 0x02, + GPIO_BOTH_EDGE_INTERRUPT_TRIGGER = 0x03, + GPIO_LOW_LEVEL_INTERRUPT_TRIGGER = 0x04, + GPIO_HIGH_LEVEL_INTERRUPT_TRIGGER = 0x05, + GPIO_MAX_INTERRUPT_TYPES +} GPIO_INTERRUPT_TYPE; + +/* + * ---- Variable Externs ------------------------------------------------- + * ---- Function Prototypes ---------------------------------------------- + */ + +#endif /* LINUX_GPIO_TYPES_H */ diff --git a/arch/arm/mach-bcmring/include/mach/reg_gpio.h b/arch/arm/mach-bcmring/include/mach/reg_gpio.h new file mode 100644 index 0000000..05dbf4a --- /dev/null +++ b/arch/arm/mach-bcmring/include/mach/reg_gpio.h @@ -0,0 +1,131 @@ +/***************************************************************************** +* Copyright 2003 - 2008 Broadcom Corporation. All rights reserved. +* +* Unless you and Broadcom execute a separate written software license +* agreement governing use of this software, this software is licensed to you +* under the terms of the GNU General Public License version 2, available at +* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). +* +* Notwithstanding the above, under no circumstances may you combine this +* software in any way with any other Broadcom software provided under a +* license other than the GPL, without Broadcom's express prior written +* consent. +*****************************************************************************/ + +/* +***************************************************************************** +* +* reg_gpio.h +* +* PURPOSE: +* +* This file contains an emulation layer which is used by code which +* can't use gpiolib (like boot-loaders and non-GPL code) +* +* NOTES: +* +*****************************************************************************/ + +#if !defined(ASM_ARCH_REG_GPIO_H) +#define ASM_ARCH_REG_GPIO_H + +/* ---- Include Files ---------------------------------------------------- */ + +#include + +#if defined(CONFIG_BCM_VC03B0) || defined(CONFIG_BCM_VCHIQ) +#include +#include + +#ifdef GPIOHW_TOTAL_NUM_PINS +#undef GPIOHW_TOTAL_NUM_PINS +#endif + +#if (defined(HW_VC03_RUN2_GPIO) && defined(HW_VC03_HAT2_GPIO)) +#define GPIOHW_TOTAL_NUM_PINS (VC03_1_GPIO_PIN_OFFSET + VC03_1_GPIO_NUM_PINS) +#else +#define GPIOHW_TOTAL_NUM_PINS (VC03_0_GPIO_PIN_OFFSET + VC03_0_GPIO_NUM_PINS) +#endif +#endif + +#if defined(CONFIG_ARCH_REQUIRE_GPIOLIB) && !defined(STANDALONE) && !defined(USE_BCM_GPIO) +#define ARCH_NR_GPIOS GPIOHW_TOTAL_NUM_PINS +#include +#define gpio_get_value(gpio) __gpio_get_value(gpio) +#define gpio_set_value(gpio, value) __gpio_set_value(gpio, value) +#define gpio_cansleep(gpio) __gpio_cansleep(gpio) +#else + + /* + * The else side of this definition provides a gpiolib emulation for versions + * of the kernel which haven't got gpiolib ported to it yet. + */ + /* These definitions occur in include/linux/broadcom/gpio.h */ + +#endif + +/* ---- Constants and Types ---------------------------------------------- */ + +/* ---- Variable Externs ------------------------------------------------- */ + +/* ---- Function Prototypes ---------------------------------------------- */ + +/**************************************************************************** +* +* Configure a GPIO pin as an input pin +* +*****************************************************************************/ + +static inline int bcm_gpio_direction_input(unsigned gpio) +{ + GpioHw_SetDirInput(gpio); + + return 0; + +} /* bcm_gpio_direction_input */ + +/**************************************************************************** +* +* Configure a GPIO pin as an output pin and sets its initial value. +* +*****************************************************************************/ + +static inline int bcm_gpio_direction_output(unsigned gpio, int initial_value) +{ + GpioHw_SetValDirOutput(gpio, initial_value); + + return 0; + +} /* bcm_gpio_direction_output */ + +/**************************************************************************** +* +* Retrieve the value of a GPIO pin. Note that this returns zero or the raw +* value. +* +*****************************************************************************/ + +static inline int bcm_gpio_get(unsigned gpio) +{ + return GpioHw_GetVal(gpio); + +} /* bcm_gpio_get */ + +/**************************************************************************** +* +* Set the value of a GPIO pin +* +*****************************************************************************/ + +static inline void bcm_gpio_set(unsigned gpio, int value) +{ + GpioHw_SetVal(gpio, value); + +} /* bcm_gpio_set */ + +#if defined(__KERNEL__) +#include +void __init brcm_init_gpio(void); +#endif + +#endif /* ASM_ARCH_REG_GPIO_H */ -- 1.6.0.6 Leo Chen