From: Calvin Dodge Date: Tue, 20 Aug 2002 13:21:37 +0000 Subject: [LARTC] uplink with multiple lines Message-Id: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org I've been trying - without success - to aggregate the bandwidth of 3 DSL modems using the instructions in the HowTo (sections 4.2.1 and 4.2.2). I _believe_ I'm following the instructions to the letter, but when I add the last command (the "ip route" with "nexthop") then nothing goes out through the modems. Each modem works when I add a single default gateway pointing to it, so I don't believe the modems are the problem. Two of the modems _do_ have private IP addresses (192.168.x.1) - could that be confusing the kernel? If so, do I need to get public IP addresses for those modems? Do I HAVE to create a patched kernel (ala Anastasov)? May I post the script I used to try this out? Thanks, folks! Calvin Dodge Certified Linux Bigot (tm) http://www.caldodge.fpcc.net _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/