From: "Bartek" Date: Wed, 09 Oct 2002 10:00:53 +0000 Subject: [LARTC] Strange thing in HTB classes Message-Id: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org Hi, I've one small question. Why packets travel through one class when they shouldnt? My configuration follows: I have ie. one root class and one other class. In the other class I have rateKbit ceilKbit. I'm using HTB script to launch this. In the other class I have 3 rules: RULE=my_ip,:1024/0xfc00 RULE=my_ip,:2048/0xfc00 RULE=my_ip,:3072/0xfc00 The root class has all 100Mbit bandwidth. When I send ping to any computer through my_ip it not going through other class. That is right. But when I do flood ping i see that something flowing through other class and transmission stopping for a while. This behaviour like it is limiting to the 10Kbit of the other class and not going through root class. I dont't know why. The more ports I include in the other class the less throughput of flood ping is. But when I set rate0Kbit or more it is going ok but still through other class. I think that pings should go through root class entirely. When I include only a few ports the flood ping is going ok and nothing go through other class. I don't know why it is so. I appreciate for a good answer. Bartosz Jurasinski _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/