From: Stef Coene Date: Tue, 22 Oct 2002 19:28:36 +0000 Subject: Re: Re: Re: [LARTC] help, a children can not borrow from a parent? Message-Id: List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org On Tuesday 22 October 2002 11:14, lihpc@Legend.com wrote: > SORRY! not 12bits, should 12mbits > > > WHEN i send packets from 10.1.1.1 at rate frome 12mbit to 50mbit BY > using > SMARTBIT 600, the rate of class 10:100 is always 12Mbits. > > >I suppose it's the SMATRBIT 600 that says it sends 12bits. > >WHAT if you change 12mbit to 15mbit. WHAT if you send more then 20Mbit. > > WHAT > > >if you change 12mbit to a lower value (1mbit). > >CAN you can do that and post the results? > >I don't think there is an error in your setup. > > WHEN i change 12mbit to 15mbit and send packets at rate > 15mbit,20mbit,30mbit,50mbit, the rate of class 10:100 is always 15mbits. > WHEN i change 12mbit to 30mbit and send packets at rate > 30mbit,40mbit,50mbit, the rate of class 10:100 is always 30mbits. > WHEN i change 12mbit to a lower value (1mbit) and send packets at rate > 1mbit,2mbit,10mbit,20mbit, the rate of class 10:100 is always 1mbits. The ceil parameter always worked for me. What version of tc/htb/kernel are you using? Stef -- stef.coene@docum.org "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.oftc.net _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/