From: Stef Coene Date: Fri, 06 Dec 2002 19:59:06 +0000 Subject: Re: [LARTC] redhat ready for htb? Message-Id: List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org On Friday 06 December 2002 19:58, James Ma wrote: > Hi, All, > > I want to use linux (redhat) to do some bandwidth shaping work. I did know > something on HTB and IPtables but I have very limited knowledge on Linux > itself. I was told it's hard for non linux expert to patch the kernel or > even ptach HTB into IPROUTE2. So I would like to know if there is Redhat > version with IPROUTE2 and HTB ready, then I don't need to do any patch > work? Or if it's not available now, I know kernel 2.4.20 has HTB support, > but how to patch HTB into IProute2? The RH kernel has htb support. But they forget to patch the tc command. You can download a tc binary with htb support from www.docum.org on the faq page. Or the one you can find on the homepage of htb. Stef -- stef.coene@docum.org "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.oftc.net _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/