From: Lars Gaarden Date: Thu, 30 Jan 2003 20:34:57 +0000 Subject: [LARTC] Shaping and PPPoE Message-Id: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org It seems like this scenario isn't covered in any faq: I have a PPPoE server running on eth1, and want to control outgoing traffic to users connecting through PPPoE. Internet --- eth0 - eth1 --- users over PPPoE ppp0 ppp1 ppp.. Each user is assigned a static address (i.e., user1 is always 10.1.1.1). However, the pppx devices are assigned dynamically based on the order they connect (if user3 connects first, he gets ppp0). Should I configure shaping rules (based on IP addresses) on eth1, or do I have to write a script that is watching the PPPoE logs, figure out which user is which pppx and add rules to each pppx accordingly? That is, can I shape on IP on eth1 when I am using PPPoE, or do I have to shape on each virtual ppp device? -- LarsG _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/