From: Carol Anne Ogdin Date: Fri, 04 Apr 2003 15:30:23 +0000 Subject: [LARTC] routed vs. gated Message-Id: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org This is a multipart message in MIME format. --=_alternative 00552E1288256CFE_Content-Type: text/plain; charset="us-ascii" Can anybody help me figure out whether I should be using gated rather than routed? I have two DSLs connected to my firewall/router (RH 7.3), running routed, with load balancing. I'm trying to figure out whether gated-3.6 (the last open-source version) is better for my system, but I can't find enough out about it to decide whether to move to it (or something even better). I'm revisiting the architecture of my entire system, aiming at higher reliability and automatic rerouting if one of the DSLs is down. Any advice would be most appreciated. --Carol Anne --=_alternative 00552E1288256CFE_Content-Type: text/html; charset="us-ascii"
Can anybody help me figure out whether I should be using gated rather than routed?

I have two DSLs connected to my firewall/router (RH 7.3), running routed, with load balancing.  I'm trying to figure out whether gated-3.6 (the last open-source version) is better for my system, but I can't find enough out about it to decide whether to move to it (or something even better).  I'm revisiting the architecture of my entire system, aiming at higher reliability and automatic rerouting if one of the DSLs is down.

Any advice would be most appreciated.

--Carol Anne --=_alternative 00552E1288256CFE_=-- _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/