From: Stef Coene Date: Sat, 12 Apr 2003 14:18:44 +0000 Subject: [LARTC] Re: HTB Question Message-Id: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org On Wednesday 09 April 2003 20:06, Allan Gee wrote: > Hi Stef, > Sorry to write to you directly but my list membership is not working, I > receive the archive but cant send to the list, cant delete myself because I > don't exist and can't rejoin as they say I do exist, anyway hope you don't > mind > > Can you tell me what the difference between these two scripts is please. Sorry it took so long to formulate an answer. It' was a busy week for me. > What I want to achieve is a high speed channel 1000kbit from port 3000 from > an application running on the box doing the shaping, while shaping the > traffic at 64kbit going thru the box to the network, WITHOUT affecting the > small 64kbit bandwidth. > > In EXAMPLE 1 ALL traffic goes thru 1:1 but does not seem to affect the slow > channels 1:2,1:3 and 1:4 > In EXAMPLE 2 the port 3000 traffic only goes thru 1:998 and 1:997 but it > shows "lended" packets in the "tc stats" > My feeling is EXAMPLE 2 is the right way but I would like your input You need to do something like this : root htb qdisc class 1:1 with rate = ceil = 1000 + 64 = 1046 class 1:2 with rate = 1000, ceil = 1064 class 1:3 with rate = 64, ceil = 64 If you want to control the 64 kbit more, you have to attach the classes to 1:3. Giving class 1:2 a ceil of 1064, allows it to borrow the unused bandwidth of class 1:3. You also have to give class 1:3 a ceil of 64, so you never send more data then your link cna handle. I also have some comments on your scripts : > tc class add dev eth0 parent 1: classid 1:998 htb rate 1000kbit > tc qdisc add dev eth0 parent 1:998 handle 1998: sfq perturb 10 The added sfq will removed as soone as you execute the foloowing command. > tc class add dev eth0 parent 1:998 classid 1:997 htb rate 1000kbit ceil > 1000kbit prio 0 quantum 15140 > tc filter add dev eth0 protocol ip parent 1:0 prio 1 u32 match ip sport > 3000 0xffff flowid 1:997 > EXAMPLE 2: > tc qdisc del dev eth0 root handle 1: htb default 999 > tc qdisc add dev eth0 root handle 1: htb default 999 r2q 1 > tc class add dev eth0 parent 1: classid 1:1 htb rate 64kbit > tc class add dev eth0 parent 1:1 classid 1:5 htb rate 1000kbit ceil > 1000kbit prio 0 quantum 15140 > tc class add dev eth0 parent 1:5 classid 1:6 htb rate 1000kbit ceil > 1000kbit prio 0 quantum 15140 Why are you doing this ??? Stef -- stef.coene@docum.org "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.oftc.net _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/