From: Stef Coene Date: Wed, 23 Apr 2003 18:19:40 +0000 Subject: Re: [LARTC] Everything up and running with HTB/SFQ Message-Id: List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org On Wednesday 23 April 2003 05:55, Frank v Waveren wrote: > I dropped the entire PRIO setup and went with a single HTB qdisc with > SFQs in each class, and it's working really well. Am I correct in the > observation that the rate of a HTB class doesn't matter if all classes > have different prios? No. The rate is still used as a minimum. So each class will get at least its rate. The prio is used to distribute the remaining bandwidht AND to give some classes a lower latency. Stef -- stef.coene@docum.org "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.oftc.net _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/