From: "hare ram" Date: Wed, 07 May 2003 03:58:52 +0000 Subject: Re: [LARTC] Limiting bandwidth pr. host Message-Id: List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable To: lartc@vger.kernel.org Hi For you Kind if Application, i would recomend to use WRR, it will do the total/numberof users or you can looking www.apconnections.net Mr Art have some application what you are looking for best Places are 1. http://www.lartc.org 2. http://www.apconnections.net hare QoS Learner ----- Original Message ----- From: "Matias Bj=F8rling" To: Sent: Wednesday, May 07, 2003 2:14 AM Subject: [LARTC] Limiting bandwidth pr. host > Hey > > I have tried over a few weeks to make a special configuration with TC. > > I want every IP/Host on the network to have exactly 8kb/s from the internet. > So every host max can use that specified bandwidth. Not more even if the > internet line aint fully used. > > I have tried to make the rules pr. ip, so i specified one rule in TC for > every host on the network. But when i had loader around 100 rules into TC, > the linux server crashed. > > On FreeBSD it's very simple, a virtual netcard and then 2 command lines. > > If someone have a good solution, i will be happy, and it would really help > me in the daily work > > I want to use it with TC with maybe CBQ, HTQ, WRR or other shapins modules. > What's the easiest way? > > Thank You > > Best Regards > Matias Bjoerling > > _______________________________________________ > LARTC mailing list / LARTC@mailman.ds9a.nl > http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/ > _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/