From: Patrick Turley Date: Wed, 06 Aug 2003 21:52:28 +0000 Subject: Re: [LARTC] HTB : quantum of class is small. Consider Message-Id: List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org Oops again. While the note I indicated below is VERY informative, it's not at all clear why HTB would complain if the rate is 78Kbit - that corresponds to a quantum of 7800 bytes, which is plenty large. Yes, I know I said I mispelled "kpbs" below, and I also know that the correct way to say "kilobits per second" to HTB is to say "Kbit". On Wed, 2003-08-06 at 16:26, Patrick Turley wrote: > Oops - I just discovered Stef's FAQ search capability and found the > answer for myself. For those who are interested: > > http://qos.dyndns.org:3389/cgi-bin/fom?&file1 > > On Wed, 2003-08-06 at 16:14, Patrick Turley wrote: > > I have a number of classes with HTB qdiscs feeding into a root HTB > > qdisc. Whenever I set the rate on any of the subordinate qdiscs to 78 > > kpbs or less, I get the following message: > > > > HTB : quantum of class is small. Consider r2q change. > > > > I have no clue what this means or how I might fix it. Can anyone help? > > > > > > _______________________________________________ > > LARTC mailing list / LARTC@mailman.ds9a.nl > > http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/ > > _______________________________________________ > LARTC mailing list / LARTC@mailman.ds9a.nl > http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/ _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/