From: Andreani Luca Date: Fri, 05 Sep 2003 13:54:07 +0000 Subject: R: R: [LARTC] time window in CBQ MIME-Version: 1 Content-Type: multipart/mixed; boundary="----_=_NextPart_001_01C373B5.2D0CBC30" Message-Id: List-Id: To: lartc@vger.kernel.org This message is in MIME format. Since your mail reader does not understand this format, some or all of this message may not be legible. ------_=_NextPart_001_01C373B5.2D0CBC30 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Ok, but what about my iproute/tc script for VoiP priorization? Any suggestion? -----Messaggio originale----- Da: John McCain [mailto:jmccain@layer3al.com] Inviato: venerd=EC 5 settembre 2003 15.44 A: lartc@mailman.ds9a.nl Oggetto: Re: R: [LARTC] time window in CBQ I must recommend against using G723 unless you are in a very bandwidth starved=20 but high reliability situation. VOIP is extremely time sensitive, and = the=20 latency involved in compression greatly reduces your margin for error. = G711 uses more bandwidth (64k per call is a reasonable figure, but it = depends on=20 packetization), but will be considerably more forgiving to jitter. On Friday 05 September 2003 05:03 am, Catalin BOIE wrote: > On Fri, 5 Sep 2003, Andreani Luca wrote: > > is 64kbit/sec enough for VoIP ? I would have thought not.. but I = do not > > have VoIP... > > Steve, what voip codec do you use? > If you can select, use G723 (6.3 kbit/s) > > > /steve > > --- > Catalin(ux) BOIE > catab@deuroconsult.ro > _______________________________________________ > LARTC mailing list / LARTC@mailman.ds9a.nl > http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: = http://lartc.org/ _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/ ------_=_NextPart_001_01C373B5.2D0CBC30 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable R: R: [LARTC] time window in CBQ

Ok, but what about my iproute/tc script for VoiP = priorization? Any suggestion?

-----Messaggio originale-----
Da: John McCain [mailto:jmccain@layer3al.com]
Inviato: venerd=EC 5 settembre 2003 15.44
A: lartc@mailman.ds9a.nl
Oggetto: Re: R: [LARTC] time window in CBQ


I must recommend against using G723 unless you are in = a very bandwidth starved
but high reliability situation.  VOIP is = extremely time sensitive, and the
latency involved in compression greatly reduces your = margin for error.  G711
uses more bandwidth (64k per call is a reasonable = figure, but it depends on
packetization), but will be considerably more = forgiving to jitter.


On Friday 05 September 2003 05:03 am, Catalin BOIE = wrote:
> On Fri, 5 Sep 2003, Andreani Luca wrote:
> > is 64kbit/sec enough for VoIP ?  I = would have thought not.. but I do not
> > have VoIP...
>
> Steve, what voip codec do you use?
> If you can select, use G723 (6.3 kbit/s)
>
> > /steve
>
> ---
> Catalin(ux) BOIE
> catab@deuroconsult.ro
> = _______________________________________________
> LARTC mailing list / = LARTC@mailman.ds9a.nl
> http://mailman.ds9a.nl/mailman/listinfo/lartc = HOWTO: http://lartc.org/

_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc = HOWTO: http://lartc.org/

------_=_NextPart_001_01C373B5.2D0CBC30-- _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/