From: "Jere Cassidy" Date: Thu, 30 Oct 2003 15:11:58 +0000 Subject: [LARTC] Re: Bandwidth shaping help Message-Id: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org I had same issue (wanted to control server even though it wasnt doing routing) and added the following to the wondershaper script: #exempt networks (i.e. local lan) EXEMPT2.168.10.0/24 #added class for internal network traffic (5mbit of a 10mbit link) tc class add dev $DEV parent 1: classid 1:2 cbq rate 5mbit \ allot 1500 prio 4 avpkt 1000 #qdisc tc qdisc add dev $DEV parent 1:2 handle 90: sfq perturb 10 #loop through existing networks for a in $EXEMPT do tc filter add dev $DEV parent 1:0 protocol ip pri 9 u32 \ match ip dst $a flowid 1:2 done This worked fine! The following part however, does not work for some reason. I submitted a help ticket to this list, but it was waiting for moderator approval: #for ingress: tc qdisc add dev $DEV handle ffff: ingress # filter *everything* to it (0.0.0.0/0), drop everything that's # coming in too fast: #exemptions by jere for a in $EXEMPT do tc filter add dev $DEV parent ffff: protocol ip prio 50 u32 match ip src \ $a police rate 5mbit burst 15k drop flowid :1 done tc filter add dev $DEV parent ffff: protocol ip prio 50 u32 match ip src \ 0.0.0.0/0 police rate ${DOWNLINK}kbit burst 10k drop flowid :1 Since its not a seperate class, I cant see if the packets are getting matched. Everything is filtered at the second 0.0.0.0/0 police rate. So now i can transfer files quickly from my server, but not to it. any help? _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/