From: Daniel Bergqvist daniel@netatonce.se Date: Tue, 17 Oct 2000 09:21:06 +0000 Subject: SV: SV: SV: [LARTC] Loadbalancing on multiple eth rtl8139 Message-Id: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable To: lartc@vger.kernel.org
> Fr=E5n: lartc-a=
dmin@mailman.ds9a.nl
> [mailto:lartc-ad=
min@mailman.ds9a.nl]F=F6r bert hubert
>
> On Mon, Oct 16, 2000 at 03:25:37PM +0200, Daniel Bergqvist wrot=
e:
>
> > This is basicly what I'm trying to do, but inside the sch_=
teql
> driver. What
> > is the problems with tunnels?
>
> If your link saturates and you get packetloss, you get very wei=
rd
> performance problems. Also, one lost packet stops *all* your IP=
 traffic
> until it's resent.

My idea is to have to devices, teql_send0 and teql_receive0. The teql_send0
is the old teql0 device, but it also adds a serial number and a new IP
header so the packet goes to the teql_receive0 device at the remote end. I
know that the packets will be sent in order on each ethernet link to the
teql_receive0 device so it keeps a queue for each connection. If there is no
packet loss only one queue that will have packets. If both queues have a
packet it means we have a packet loss. The teql_receive0 device then sends
the packets in the original order.

>
> > Where is the archive for netdev@oss.sgi.com?
>
> It appears to have died. I'll forward you the right messages.

I got it. Thanks!

> Regards,
>
> bert hubert

Regards,
Daniel