From: Daniel Bergqvist daniel@netatonce.se Date: Fri, 17 Nov 2000 09:37:29 +0000 Subject: SV: [LARTC] Shaping Incoming Traffic Message-Id: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable To: lartc@vger.kernel.org
I have used rshaper and it works fine.

You may also look at "ingres". If you do, see the discussions abo=
ut ingress
on the "Linux-Diffserv" mailing list http://icawww1.epfl.ch/linux-diffserv/.

Regards Daniel


Fr=E5n: lartc-admin@mailman.=
ds9a.nl [mailto:lartc-ad=
min@mailman.ds9a.nl]F=F6r
Fredrik Bj=F6rk
At 20:09 2000-11-16 +0000, you wrote:
>Is there no way to shape incoming traffic?

Try
http=
://freshmeat.net/projects/rshaper/?highlight=3Drshaper
for rshaper. I haven't tried it myself, but they use a metod where they
delay the notification of received packets to the sending host.

/Fredrik

__________________________________________________________________________
Fredrik Bj=F6rk   Seaside Internet/Varberg Energi   Fredrik.Bjork@seaside.se

_______________________________________________
LARTC mailing list / LARTC@mailman=
.ds9a.nl
http://mailman.ds=
9a.nl/mailman/listinfo/lartc HOWTO:
http://ds9a.nl/2.4Routing/