From: Daniel Bergqvist daniel@netatonce.se Date: Fri, 24 Nov 2000 16:10:52 +0000 Subject: SV: [LARTC] shaping incoming traffic Message-Id: List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable To: lartc@vger.kernel.org
Limit the outgoing traffic to the internal network (to the students). =
You
may start with a limit of 64kbit/s to the students.

Regards
Daniel

-----Ursprungligt meddelande-----
Fr=E5n: lartc-admin@mailman.=
ds9a.nl [mailto:lartc-ad=
min@mailman.ds9a.nl]F=F6r
steeman philip
I'm just learning to use QOS, and it seems very powerfull.
Can some-one give me a hint what to do for the following (simplified)
problem.


           128kbit   +------+  10Mb  +----------+ 10Mb
provider-------------+router+--------+linux-masq+------------ internal
network
                     +------+        +----------+
                        eth0        eth1=10.1.14.1


The only thing I can change things on, is the linux-computer.
This computer is a masquerading computer (I don't know if this poses
problems?)

The problem:

On the internal network all the students are downloading as fast(slow) as
they can.
So the incoming traffic is almost 100%.
The outgoing traffic is very low (max 20%).

Someone in our library wants to telnet from an inside computer to an
outside computer. This works extreme slow (unworkable).

Is there a solution for this problem?

                                        Thanks in advance,

                                                Philip