From: Jing Shen Date: Tue, 12 Jun 2001 13:47:54 +0000 Subject: [LARTC] Unknown filter "tcindex" ? Message-Id: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org Hi: Execuse me if this has been mentioned before, I've looked around the archive but did not find anything about the problem I met. I'm trying to use tcindex to classify the the packet outgoing to one interface. I do as the following : tc q a dev eth0 root handle 10:0 cbq bandwidth 10Mbit avpkt 1500 tc c a dev eth0 parent 10:0 classid 10:1 cbq bandwidth 10Mbit rate 10Mbit maxburst 50 avpkt 1500 tc c a dev eth0 parent 10:1 classid 10:100 cbq bandwidth 10Mbit rate 5Mbit maxburst 50 avpkt 1500 tc q a dev eth0 parent 10:100 tbf limit 65535 burst 2048 rate 5Mbit tc f a dev eth0 parent 10:0 protocol ipv4 prio 100 handle 151 tcindex classid 10:100 The first 4 commands were executed successfully , but the last line which use tcindex always get the wrong echo as: "Unknown filter "tcindex", hence option "classid" is unparsable" , I'm sure I've check the tc_index item in the Linux kernel configuration (I use linux2.4.0). Is there anyone would do me a favor to tell me why this does not work? Thanks a lot. James Shen _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/