From: ptb@lab.it.uc3m.es (Peter T. Breuer) Subject: Re: Severe, huge data corruption with softraid Date: Thu, 3 Mar 2005 01:46:47 +0100 Message-ID: References: <42264AF4.4000600@tls.msk.ru> <42265307.5040400@tls.msk.ru> Sender: linux-raid-owner@vger.kernel.org To: linux-raid@vger.kernel.org List-Id: linux-raid.ids Michael Tokarev wrote: > And finally I managed to get an OOPs. What CPU? SMP? How many? Which kernel? Is it preemptive? > Created fresh raid5 array out of 4 partitions, > chunk size = 4kb. > Created ext3fs on it. > Tested write speed (direct-io) - it was terrible, > about 6MB/sec for 64KB blocks - it's very unusual. > Umounted the fs. > Did a direct-write test agains the md device. > And at the same time, did an `rmmod raid0' - That may be a race - I get horrible oops from time to time on module removal in the 2.6 series, with quite a few different modules, but it looks more like a race as soon as you say "and at the same time". > unused in my config at that time. -- not sure > if it's relevant or not. > And get "sigsegv" in my program, and the > following oops: > > md: raid0 personality unregistered Well, the rmmod worked, and then the other (write) process oopsed. > Unable to handle kernel paging request at virtual address f8924690 That address is bogus. Looks more like a negative integer. I suppose ram corruption is a posibility too. > printing eip: > f8924690 > *pde = 02127067 > *pte = 00000000 > Oops: 0000 [#1] > SMP > Modules linked in: raid10 nfsd exportfs raid5 xor nfs lockd sunrpc 8250 serial_core w83627hf i2c_sensor > i2c_isa i2c_core e1000 genrtc ext3 jbd mbcache raid1 sd_mod md aic79xx scsi_mod > CPU: 1 > EIP: 0060:[] Not tainted VLI > EFLAGS: 00010286 (2.6.9-i686smp-0) > EIP is at 0xf8924690 > eax: ecd04028 ebx: c99ead40 ecx: c21dc380 edx: c99ead40 > esi: ecd04028 edi: f8924690 ebp: c21dc380 esp: f1d39cac > ds: 007b es: 007b ss: 0068 > Process dio (pid: 21941, threadinfo=f1d39000 task=f7d40890) > Stack: c015b5dd c99ead40 c10063a0 00001000 00000000 c015b64c 00001000 00000000 > f7d23800 00000000 c01778f2 00000000 f7d23800 c017798d f7d23800 c10063a0 > c0177a4e 00000000 00000001 00000000 f7d2384c f7d23800 c0177e78 00001000 Code? > Call Trace: > [] __bio_add_page+0x13d/0x180 3/4 of the way through. > [] bio_add_page+0x2c/0x40 > [] dio_bio_add_page+0x22/0x70 > [] dio_send_cur_page+0x4d/0xa0 > [] submit_page_section+0x6e/0x140 > [] do_direct_IO+0x288/0x380 That looks the relevant entry. > [] direct_io_worker+0x1f4/0x520 > [] __blockdev_direct_IO+0x20d/0x308 > [] blkdev_get_blocks+0x0/0x70 > [] blkdev_direct_IO+0x5f/0x80 > [] blkdev_get_blocks+0x0/0x70 > [] generic_file_direct_IO+0x74/0x90 > [] generic_file_direct_write+0x62/0x170 > [] inode_update_time+0xbb/0xc0 > [] generic_file_aio_write_nolock+0x2ce/0x490 > [] generic_file_write_nolock+0x91/0xc0 > [] scheduler_tick+0x16e/0x470 > [] smp_apic_timer_interrupt+0x85/0xf0 > [] autoremove_wake_function+0x0/0x50 > [] blkdev_file_write+0x0/0x30 > [] blkdev_file_write+0x20/0x30 > [] vfs_write+0xb0/0x110 > [] sys_write+0x47/0x80 > [] syscall_call+0x7/0xb > Code: Bad EIP value. More info needed. Peter