From: Arve Knudsen Subject: Re: RME 9636 not recognized with 2.6 kernel? Date: Wed, 16 Jul 2003 14:45:41 +0200 Sender: alsa-devel-admin@lists.sourceforge.net Message-ID: References: Mime-Version: 1.0 Content-Type: text/plain; format=flowed; charset=iso-8859-1 Content-Transfer-Encoding: quoted-printable Return-path: In-Reply-To: Errors-To: alsa-devel-admin@lists.sourceforge.net List-Help: List-Post: List-Subscribe: , List-Unsubscribe: , List-Archive: To: alsa-devel@lists.sourceforge.net List-Id: alsa-devel@alsa-project.org > I just installed the 2.6.0 beta kernel to play around a bit, but it see= ms=20 > my RME 9636 (Hammerfall Lite) isnt recognized. When I do aplay -l, my=20 > nForce2 integrated chip shows up however. I cannot modprobe Alsa kernel= =20 > modules either (v0.95). Is this a known problem? I would just like to clarify that I was not able to insert the standalone= =20 alsa modules. I decided to change the drivers in the kernel tree to be=20 compiled as modules instead of static, and modprobing the snd-rme9652 now= =20 works. I would prefer static linking of this driver though. Regards Arve Knudsen ------------------------------------------------------- This SF.net email is sponsored by: VM Ware With VMware you can run multiple operating systems on a single machine. WITHOUT REBOOTING! Mix Linux / Windows / Novell virtual machines at the same time. Free trial click here: http://www.vmware.com/wl/offer/345/0