From: Norbert Kiesel Subject: Re: [PATCH] ahci: get JMicron JMB360 working Date: Sun, 29 Jan 2006 03:01:18 -0800 Message-ID: References: <20060129050434.GA19047@havoc.gtf.org> Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7BIT Return-path: Sender: linux-kernel-owner@vger.kernel.org To: linux-kernel@vger.kernel.org Cc: linux-ide@vger.kernel.org List-Id: linux-ide@vger.kernel.org On Sun, 29 Jan 2006 00:04:34 -0500, Jeff Garzik wrote: > > I'll be sending this upstream sooner rather than later, since part of > this is a needed bugfix. This is also a minor milestone: the first > non-Intel AHCI implementation is working with the AHCI driver. AHCI is > a nice SATA controller interface, and it's good to see other vendors > using it. VIA is using it as well, and I hope to integrate a patch for > VIA AHCI SATA support soon. > > This patch, against latest 2.6.16-rc-git, adds support for JMicron and > fixes some code that should be Intel-only, but was being executed for > all vendors. Sounds very good, thanks! Does that mean the ASRock MB http://www.asrock.com/product/product_939Dual-SATA2.htm will work? Docu says "1 x SATA2 connector (based on PCI E SATA2 controller JMB360)". Best, Norbert