From: Anders Larsen Date: Thu, 06 Jul 2006 17:16:34 +0200 Subject: [U-Boot-Users] [PATCH] make y-modem a separate config option Message-ID: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi, the loady command (which was introduced this april) bloats the size of U-Boot by almost 4K on my at91 board. The patch below introduces a new option CFG_CMD_LOADY, which can be disabled separately from CFG_CMD_LOADB to save precious space (loadb + loady together take up about 2.5 times as much code space as loadb alone). Perhaps CFG_CMD_LOADY should even be added to CFG_CMD_NONSTD for this reason? Cheers Anders Signed-off-by: Anders Larsen CHANGELOG: Optionally disable the y-modem protocol Patch by Anders Larsen , 6 Jul 2006 --- common/cmd_load.c | 28 +++++++++++++++------------- include/cmd_confdefs.h | 1 + 2 files changed, 16 insertions(+), 13 deletions(-) diff --git a/common/cmd_load.c b/common/cmd_load.c index f63b8e8..5f06129 100644 --- a/common/cmd_load.c +++ b/common/cmd_load.c @@ -33,7 +33,7 @@ #include DECLARE_GLOBAL_DATA_PTR; -#if (CONFIG_COMMANDS & CFG_CMD_LOADB) +#if (CONFIG_COMMANDS & CFG_CMD_LOADY) static ulong load_serial_ymodem (ulong offset); #endif @@ -404,7 +404,7 @@ # endif /* CFG_CMD_SAVES */ #endif /* CFG_CMD_LOADS */ -#if (CONFIG_COMMANDS & CFG_CMD_LOADB) /* loadb command (load binary) included */ +#if (CONFIG_COMMANDS & (CFG_CMD_LOADB | CFG_CMD_LOADY)) /* loadb command (load binary) included */ #define XON_CHAR 17 #define XOFF_CHAR 19 @@ -476,16 +476,7 @@ int do_load_serial_bin (cmd_tbl_t *cmdtp } } - if (strcmp(argv[0],"loady")==0) { - printf ("## Ready for binary (ymodem) download " - "to 0x%08lX at %d bps...\n", - offset, - load_baudrate); - - addr = load_serial_ymodem (offset); - - } else { - + if (strcmp(argv[0],"loadb")==0) { printf ("## Ready for binary (kermit) download " "to 0x%08lX at %d bps...\n", offset, @@ -500,6 +491,15 @@ int do_load_serial_bin (cmd_tbl_t *cmdtp printf ("## Start Addr = 0x%08lX\n", addr); load_addr = addr; } +#if (CONFIG_COMMANDS & CFG_CMD_LOADY) + } else { + printf ("## Ready for binary (ymodem) download " + "to 0x%08lX at %d bps...\n", + offset, + load_baudrate); + + addr = load_serial_ymodem (offset); +#endif } if (load_baudrate != current_baudrate) { printf ("## Switch baudrate to %d bps and press ESC ...\n", @@ -1086,7 +1086,7 @@ #endif /* CFG_CMD_SAVES */ #endif /* CFG_CMD_LOADS */ -#if (CONFIG_COMMANDS & CFG_CMD_LOADB) +#if (CONFIG_COMMANDS & (CFG_CMD_LOADB | CFG_CMD_LOADY)) U_BOOT_CMD( loadb, 3, 0, do_load_serial_bin, "loadb - load binary file over serial line (kermit mode)\n", @@ -1095,6 +1095,7 @@ U_BOOT_CMD( " with offset 'off' and baudrate 'baud'\n" ); +#if (CONFIG_COMMANDS & CFG_CMD_LOADY) U_BOOT_CMD( loady, 3, 0, do_load_serial_bin, "loady - load binary file over serial line (ymodem mode)\n", @@ -1102,6 +1103,7 @@ U_BOOT_CMD( " - load binary file over serial line" " with offset 'off' and baudrate 'baud'\n" ); +#endif /* CFG_CMD_LOADY */ #endif /* CFG_CMD_LOADB */ diff --git a/include/cmd_confdefs.h b/include/cmd_confdefs.h index cf36583..ab596cd 100644 --- a/include/cmd_confdefs.h +++ b/include/cmd_confdefs.h @@ -75,6 +75,7 @@ #define CFG_CMD_DIAG 0x0000008000000000U #define CFG_CMD_FPGA 0x0000010000000000ULL /* FPGA configuration Support */ #define CFG_CMD_HWFLOW 0x0000020000000000ULL /* RTS/CTS hw flow control */ #define CFG_CMD_SAVES 0x0000040000000000ULL /* save S record dump */ +#define CFG_CMD_LOADY 0x0000080000000000ULL /* loady (implies loadb) */ #define CFG_CMD_SPI 0x0000100000000000ULL /* SPI utility */ #define CFG_CMD_FDOS 0x0000200000000000ULL /* Floppy DOS support */ #define CFG_CMD_VFD 0x0000400000000000ULL /* VFD support (TRAB) */