From: Matwey V. Kornilov Date: Sat, 20 Jul 2019 20:20:28 +0300 Subject: [U-Boot] zynq_z_turn_defconfig: no info from SPL Message-ID: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hello, I am trying to build u-boot v2019.07 with zynq_z_turn_defconfig config. I obtain spl/boot.bin file that is placed at the first FAT partition as required by BootROM docs. I also put u-boot.img and u-boot.bin at the same partition. However, when I powered the board, nothing happening at all. I've checked that when I replace boot.bin with a binary provided on the vendor CD disk, the BootROM is able to find and run vendor bootloader. I even don't see SPL banner when try to rebuild u-boot myself even CONFIG_DEBUG_UART is enabled in the config. How could I figure out what is happening?