From: Matwey V. Kornilov Date: Sat, 27 Jul 2019 18:29:25 +0300 Subject: [U-Boot] zynq_z_turn_defconfig: no info from SPL In-Reply-To: References: Message-ID: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: 8bit To: u-boot@lists.denx.de 20.07.2019 20:20, Matwey V. Kornilov пишет: > Hello, > > I am trying to build u-boot v2019.07 with zynq_z_turn_defconfig config. > I obtain spl/boot.bin file that is placed at the first FAT partition as > required by BootROM docs. I also put u-boot.img and u-boot.bin at the > same partition. > However, when I powered the board, nothing happening at all. > > I've checked that when I replace boot.bin with a binary provided on the > vendor CD disk, the BootROM is able to find and run vendor bootloader. > > I even don't see SPL banner when try to rebuild u-boot myself even > CONFIG_DEBUG_UART is enabled in the config. > > How could I figure out what is happening? This patch helped me https://patchwork.ozlabs.org/patch/1110114/ But I still see only the following: ���渝��� U-Boot SPL 2019.07-00840-g60df776928 (Jul 27 2019 - 18:07:38 +0300) mmc boot Trying to boot from MMC1 > > _______________________________________________ > U-Boot mailing list > U-Boot at lists.denx.de > https://lists.denx.de/listinfo/u-boot >