From: Takashi Iwai Subject: Re: Conexant CX20561 - Microphone problems Date: Mon, 02 Nov 2009 14:05:37 +0100 Message-ID: References: <200910291859.41076.shawn.starr@rogers.com> Mime-Version: 1.0 (generated by SEMI 1.14.6 - "Maruoka") Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: Received: from mx2.suse.de (cantor2.suse.de [195.135.220.15]) by alsa0.perex.cz (Postfix) with ESMTP id 4E3D710389B for ; Mon, 2 Nov 2009 14:05:37 +0100 (CET) In-Reply-To: <200910291859.41076.shawn.starr@rogers.com> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: alsa-devel-bounces@alsa-project.org Errors-To: alsa-devel-bounces@alsa-project.org To: Shawn Starr Cc: alsa-devel@alsa-project.org List-Id: alsa-devel@alsa-project.org At Thu, 29 Oct 2009 18:59:40 -0400, Shawn Starr wrote: > > Hello ALSA developers, > > I am having problems with the microphone on the following hardware this is on > a Lenovo W500 laptop. > > Card: HDA Intel > Chip: Conexant CX20561 (Hermosa) > > Here is the problems im noticing: > > 1) If I use ALSA 'default' with the microphone I get noise interference on > output [high/low/high/low]. > > If I switch this to use the "ALSA Capture on HDA Intel [CONEXANT Analog] I get > interference except it is the standard 60Hz electrical noise [steady noise] > > 2) Using the internal/external microphones gives an inconsistent volume. It > also does not seem to work with the microphone cutting out so much. I need to > adjust Digital + another microphone but it still drops capturing. > > Alsamixer shows: Digital/Docking Microphone/External Microphone/Internal > Microphone > > Here is the module options I give to the sound driver: > > options snd-intel-hda enable_msi=1 power_save=10 power_save_controller=true > model=laptop index=0 > > Assuming power saving/controller causes the microphone to cut out or not. > > 3) I'm now aware that this card has no pinouts for PCM capture > https://bugzilla.redhat.com/show_bug.cgi?id=502293 Could you give alsa-info.sh output? Run with --no-upload option, and attach the generated file. thanks, Takashi