From: Takashi Iwai Subject: Re: [BUG] intel8x0: arecord doesn't work Date: Wed, 27 Aug 2003 14:50:34 +0200 Sender: alsa-devel-admin@lists.sourceforge.net Message-ID: References: Mime-Version: 1.0 (generated by SEMI 1.14.4 - "Hosorogi") Content-Type: text/plain; charset=US-ASCII Return-path: In-Reply-To: Errors-To: alsa-devel-admin@lists.sourceforge.net List-Help: List-Post: List-Subscribe: , List-Unsubscribe: , List-Archive: To: Nathan Gray Cc: alsa-devel@lists.sourceforge.net List-Id: alsa-devel@alsa-project.org At Wed, 27 Aug 2003 01:10:06 -0700, Nathan Gray wrote: > > I'm trying to record from the built-in mic in my laptop (Dell Inspiron 4150) > but it doesn't seem to work right. If I select "Mic" as the capture source > and max out the volume then when I tap the microphone I can hear it loud > and clear in my headphones. Then I try: > > [n8gray@golux patches]$ arecord -d 5 foo.wav > Recording WAVE 'foo.wav' : Unsigned 8 bit, Rate 8000 Hz, Mono > > I tap the mic a few times as this is running. I hear the taps great while > recording, but playing back foo.wav I just hear static, with the taps > barely audible. Adjusting the recording levels doesn't change anything. what about hw:0,1 ? Takashi ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf