From: Takashi Iwai Subject: Re: VT1708 clicks & pops Date: Wed, 21 Sep 2011 10:39:44 +0200 Message-ID: References: <20110916203601.GD8309@alittletooquiet.net> <20110919231413.GD1223@alittletooquiet.net> <20110920190534.GF1223@alittletooquiet.net> Mime-Version: 1.0 (generated by SEMI 1.14.6 - "Maruoka") Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: Received: from mx2.suse.de (cantor2.suse.de [195.135.220.15]) by alsa0.perex.cz (Postfix) with ESMTP id 23218103A86 for ; Wed, 21 Sep 2011 10:39:48 +0200 (CEST) In-Reply-To: <20110920190534.GF1223@alittletooquiet.net> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: alsa-devel-bounces@alsa-project.org Errors-To: alsa-devel-bounces@alsa-project.org To: Forest Bond Cc: alsa-devel@alsa-project.org List-Id: alsa-devel@alsa-project.org At Tue, 20 Sep 2011 15:05:34 -0400, Forest Bond wrote: > > Hi Takashi, > > Thanks for your response. > > On Tue, Sep 20, 2011 at 09:22:23AM +0200, Takashi Iwai wrote: > > At Mon, 19 Sep 2011 19:14:13 -0400, > > Forest Bond wrote: > > > > > > On Fri, Sep 16, 2011 at 04:36:01PM -0400, Forest Bond wrote: > > > > I have two boards with a VT1708: > > > > > > > > * VIA EPIA EX15000G > > > > * VIA VB8002 > > > > > > > > I'm using VLC to play audio via PulseAudio to the analog outputs. The VB8002 > > > > sounds great, but the EX15000G has random pops and clicks in the output. Both > > > > machines are running exactly the same configuration (they are using the same > > > > pre-built OS image). > > > > > > Maybe this issue would be more approachable if I could produce it without > > > PulseAudio involved? > > > > Yes. > > Heh, I guess I'm probably not going to be able to do that very easily. > > > > Incidentally, these boards both produce a crackling/static sound when PulseAudio > > > is playing and the PCM mixer is turned all the way down. I have seen scattered > > > reports of this in various bug trackers. The problem does not occur when > > > playing via alsa directly. One thing I have noticed is that the crackling noise > > > follows the rhythm of the music being played. It actually sounds like the music > > > has been heavily distorted (i.e. via extreme digital clipping) and then > > > attenuated significantly. > > > > > > It seems likely that there are driver issues that PulseAudio is exposing. What > > > can I do to track them down? > > > > Is the problem related with the driver version? You mentioned the > > difference of drivers installed on your systems. > > If it's a regression of the driver, it'd be easier to figure out. > > No, the issue occurs with both driver versions. > > > Other than that, I'd try to adjust PA, e.g. try tsched=0. Usually > > this kind of problem is because of inaccurate playback position > > reporting from the hardware. PA relies (too much) on the playback > > position as default. > > Using tsched=0 fixes the pops and clicks on the EX15000G. Any idea why I might > see problems on one board but not the other given how similar they are? Do they have the same HD-audio controller chip (VIA one)? Usually it's an issue of controller chip, not codec chips, so I wonder if they behave differently even with a same controller. > The crackling with PCM volume set to 0 persists with tsched=0. Hrm, which PA version are you using? I remember vaguely a buggy PA SIMD operations in some old PA versions. Also, when you mute the mixer (nor the PA's mixer), e.g. via "alsamixer -c0", the noise goes away, right? > It seems > unlikely that this isn't driver or hardware issue. But fixing the pops and > clicks without using tsched=0 is more important to me. If you can provide > suggestions as to where I might start looking, I would be happy to try and come > up with a fix. As mentioned, the usual problem is the inaccurate DMA position reporting, especially when tsched=0 helped. It means a problem of HD-audio controller. We have already many workarounds in the driver code, but more investigations are needed in such a case... Takashi