From: Takashi Iwai Subject: Re: [PATCH v3] ASoC CS4270 codec device driver Date: Tue, 31 Jul 2007 18:17:33 +0200 Message-ID: References: <1185896812320-git-send-email-timur@freescale.com> <46AF5F7C.5020309@freescale.com> Mime-Version: 1.0 (generated by SEMI 1.14.6 - "Maruoka") Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: Received: from mx1.suse.de (cantor.suse.de [195.135.220.2]) by alsa0.perex.cz (Postfix) with ESMTP id EB0EC24361 for ; Tue, 31 Jul 2007 18:17:33 +0200 (CEST) In-Reply-To: <46AF5F7C.5020309@freescale.com> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: alsa-devel-bounces@alsa-project.org Errors-To: alsa-devel-bounces@alsa-project.org To: Timur Tabi Cc: alsa-devel@alsa-project.org List-Id: alsa-devel@alsa-project.org At Tue, 31 Jul 2007 11:12:44 -0500, Timur Tabi wrote: > > Takashi Iwai wrote: > > At Tue, 31 Jul 2007 10:46:52 -0500, > > Timur Tabi wrote: > >> This patch adds ALSA SoC support for the Cirrus Logic CS4270 codec. The > >> following features are suppored: > >> > >> 1) Stand-alone and software mode > >> 2) Software mode via I2C only > >> 3) Master mode, not Slave > >> 4) No power management > >> > >> Signed-off-by: Timur Tabi > > > > Thanks, it can be now applied fine. > > > > The only thing I noticed is below (oh I should have mentioned it > > before...): > > > >> diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig > >> index e5fb437..7824880 100644 > >> --- a/sound/soc/codecs/Kconfig > >> +++ b/sound/soc/codecs/Kconfig > >> @@ -17,3 +17,23 @@ config SND_SOC_WM8753 > >> config SND_SOC_WM9712 > >> tristate > >> depends on SND_SOC > >> + > >> +# Cirrus Logic CS4270 Codec > >> +config SND_SOC_CS4270 > >> + tristate > >> + depends on SND_SOC > >> + > >> +# Cirrus Logic CS4270 Codec Hardware Mute Support > >> +# Select if you have external muting circuitry attached to your CS4270. > >> +config SND_SOC_CS4270_HWMUTE > >> + bool > >> + depends on SND_SOC_CS4270 > >> + > >> +# Cirrus Logic CS4270 Codec VD = 3.3V Errata > >> +# Select if you are affected by the errata where the part will not function > >> +# if MCLK divide-by-1.5 is selected and VD is set to 3.3V. The driver will > >> +# not select any sample rates that require MCLK to be divided by 1.5. > >> +config SND_SOC_CS4270_VD33_ERRATA > >> + bool > >> + depends on SND_SOC_CS4270 > >> + > > > > I'd suggest to convert these comments to help texts. > > Also, usually the items to be chosen via menuconfig have > > tristate "XXXX" > > or > > bool "XXX" > > > > Could you fix them, then I'll finally merge it to upstream? > > I am following the model of the other Kconfig options. If I add the "XXXX" and the help > text, then they become selectable from "make menuconfig", but they would be the only ones > to show up like that. > > I think the reason why they are like this is because they're supposed to be selected from > the machine driver that uses them, like this: Doh, I see, these are codecs only for reverse selections. Sorry for confusion. Then I'll merge it as it is. Takashi