From: Takashi Iwai Subject: Re: How do I tell ALSA that my driver supports every possible sample rate? Date: Wed, 25 Jul 2007 17:12:59 +0200 Message-ID: References: <46A4CF38.3050107@freescale.com> <1185210867.7590.1201603759@webmail.messagingengine.com> <46A4E503.50207@freescale.com> <1185261264.6647.1201715813@webmail.messagingengine.com> <46A612A0.6000807@freescale.com> <46A65355.4040101@freescale.com> <46A7602E.6090809@freescale.com> Mime-Version: 1.0 (generated by SEMI 1.14.6 - "Maruoka") Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: Received: from mx1.suse.de (mail.suse.de [195.135.220.2]) by alsa0.perex.cz (Postfix) with ESMTP id A61F61037EE for ; Wed, 25 Jul 2007 17:12:59 +0200 (CEST) In-Reply-To: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: alsa-devel-bounces@alsa-project.org Errors-To: alsa-devel-bounces@alsa-project.org To: Timur Tabi Cc: ALSA devel List-Id: alsa-devel@alsa-project.org At Wed, 25 Jul 2007 17:08:41 +0200, I wrote: > > At Wed, 25 Jul 2007 09:37:34 -0500, > Timur Tabi wrote: > > > > Takashi Iwai wrote: > > > > >> So can I do this? > > >> > > >> static const struct snd_pcm_hardware mpc86xx_pcm_hardware = { > > >> > > >> .rates = SNDRV_PCM_RATE_CONTINUOUS, > > >> .rate_min = 1, > > >> .rate_max = (unsigned int) -1, > > > > > > In theory, yes, but these rate_min and rate_max are nothing but > > > confusing in practice. Your hardware won't support definitely such > > > rates, but the application can't know. Set some reasonable values > > > there. > > > > This is an ASOC driver. My understanding is that ASOC will take all > > the values from the machine, PCM, I2S, and codec drivers and create > > the subset that matches all drivers. That's the point I was trying > > to make: my PCM driver does *not* decide what the capabilities of > > the system are, because my DMA controller can handle all speeds. So > > I don't want to put some arbitrary limits in the PCM driver, and > > then perhaps one day it gets attached to a codec driver that can > > handle 4000Hz, but ASOC won't allow it because I used > > SNDRV_PCM_RATE_8000_192000 | SNDRV_PCM_RATES_5512 in my PCM driver. > > ASOC would incorrectly believe that the PCM driver can't handle > > 4000Hz. > > Then, > rates = -1U, > rate_min = 0, > rate_max = -1U, > are the correct values. ... of course, this assumes that codec and platform have the sane rate setting. ASoC should do some sanity checks... Takashi