From: Takashi Iwai Subject: Re: [PATCH] snd-usb-us122l: added support for US-144 Date: Tue, 22 Sep 2009 22:14:01 +0200 Message-ID: References: <4AB82D17.8090100@physik.uni-hamburg.de> <4AB8D773.9090401@physik.uni-hamburg.de> <4AB8E498.1070108@physik.uni-hamburg.de> Mime-Version: 1.0 (generated by SEMI 1.14.6 - "Maruoka") Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: Received: from mx2.suse.de (cantor2.suse.de [195.135.220.15]) by alsa0.perex.cz (Postfix) with ESMTP id C6A901038A6 for ; Tue, 22 Sep 2009 22:14:01 +0200 (CEST) In-Reply-To: <4AB8E498.1070108@physik.uni-hamburg.de> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: alsa-devel-bounces@alsa-project.org Errors-To: alsa-devel-bounces@alsa-project.org To: Tobias Hansen Cc: alsa-devel@alsa-project.org List-Id: alsa-devel@alsa-project.org At Tue, 22 Sep 2009 16:52:08 +0200, Tobias Hansen wrote: > > Takashi Iwai wrote: > > > > Yes. Udev requires that the card instance to be the child of usb > > interface. > > > Ok, done. > > > > Read the document above again :) > > The right patch format consists of a summary line, the change log > > texts, your sign-off, then the patch body. > > > Ok, here is the next try. ;) I didn't find very precise instructions on > the patch format, so if it is still not good, please tell me what to change. > > > > snd-usb-us122l: add support for US-144 > > Adds support for US-144 when attached on USB1.1. > Unlike the US-122L it uses both USB interfaces 0 and 1. > > Signed-off-by: Tobias Hansen Thanks, now applied. Takashi