From: Takashi Iwai Subject: Re: Fix for intel8x0m.c Date: Fri, 05 Mar 2004 14:16:51 +0100 Sender: alsa-devel-admin@lists.sourceforge.net Message-ID: References: <20040302223459.6f6f79a6.sashak@smlink.com> Mime-Version: 1.0 (generated by SEMI 1.14.5 - "Awara-Onsen") Content-Type: text/plain; charset=US-ASCII Return-path: In-Reply-To: <20040302223459.6f6f79a6.sashak@smlink.com> Errors-To: alsa-devel-admin@lists.sourceforge.net List-Unsubscribe: , List-Post: List-Help: List-Subscribe: , List-Archive: To: Sasha Khapyorsky Cc: alsa-devel@lists.sourceforge.net List-Id: alsa-devel@alsa-project.org At Tue, 2 Mar 2004 22:34:59 +0200, Sasha Khapyorsky wrote: > > Hi, > > There is such 'side effect' with 'intel8x0m' AC97 modem driver. During > AC97 initialization 'intel8x0m' allocates mixers for both codecs - audio > and modem. With two codec cards if 'intel8x0m' is modprobed after sound > driver ('intel8x0') when card was 'unmuted' already it mutes whole card > again, but sound driver does not (and cannot) know about it - mixer > settings are ok, but sound just disappears. > > This patch prevents such behaviour. Now mixer is allocated only for > modem codec (according to AC97 spec modem codec will be always secondary > on multi-codec AC97 bus). thanks, the patch is now applied to cvs. Takashi ------------------------------------------------------- This SF.Net email is sponsored by: IBM Linux Tutorials Free Linux tutorial presented by Daniel Robbins, President and CEO of GenToo technologies. Learn everything from fundamentals to system administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click