From: Takashi Iwai Subject: Re: Enable HP machine to enable capture mute led and output mute led Date: Wed, 18 Jun 2014 13:05:58 +0200 Message-ID: References: <561C9577BEE34837ADA1F3C2AD57F508@realtek.com.tw> Mime-Version: 1.0 (generated by SEMI 1.14.6 - "Maruoka") Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: Received: from mx2.suse.de (cantor2.suse.de [195.135.220.15]) by alsa0.perex.cz (Postfix) with ESMTP id B3340261735 for ; Wed, 18 Jun 2014 13:05:59 +0200 (CEST) In-Reply-To: <561C9577BEE34837ADA1F3C2AD57F508@realtek.com.tw> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: alsa-devel-bounces@alsa-project.org Sender: alsa-devel-bounces@alsa-project.org To: Kailang Cc: alsa-devel@alsa-project.org List-Id: alsa-devel@alsa-project.org At Wed, 18 Jun 2014 17:13:57 +0800, Kailang wrote: > > Hi Takashi, > > Attach was HP mute led support patch. > It use Line1 vref and Mic1 vref to control mute led for ALC282. > Line1 vref to control output mute led. > Mic1 vref to control input mute led. > > It use GPIO3 and Mic1 vref to control mute led for ALC280. > GPIO3 to control output mute led. > Mic1 vref to control input mute led. Could you include this kind of information in the patch changelog? The changelog text is way too short. > For the DMI string for output mute led application. > I already request from HP to support it in next release. > > HP_Mute_LED_0_A => use Mic1 vref to control mute led. > Is the string right? > I have tested upper string for Mic1 mute led. Yes, this has been working for some machines, AFAIK. thanks, Takashi