From: Takashi Iwai Subject: Re: additional problem Date: Fri, 22 Jul 2011 21:24:17 +0200 Message-ID: References: <4E0B2F67.3070304@digital-pipe.com> <4E0C68ED.1070506@digital-pipe.com> <4E1B07FD.9030702@digital-pipe.com> <4E1B1127.4080800@digital-pipe.com> <4E1B12FF.4080307@digital-pipe.com> <4E1B15EE.8080304@digital-pipe.com> <4E1C469B.4050400@digital-pipe.com> <4E1C4C8A.50703@digital-pipe.com> <4E1D9A4F.503@digital-pipe.com> <4E1DAADB.202@digital-pipe.com> <4E29C00B.5020900@digital-pipe.com> Mime-Version: 1.0 (generated by SEMI 1.14.6 - "Maruoka") Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: Received: from mx2.suse.de (cantor2.suse.de [195.135.220.15]) by alsa0.perex.cz (Postfix) with ESMTP id 327F4103804 for ; Fri, 22 Jul 2011 21:24:18 +0200 (CEST) In-Reply-To: <4E29C00B.5020900@digital-pipe.com> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: alsa-devel-bounces@alsa-project.org Errors-To: alsa-devel-bounces@alsa-project.org To: David Henderson Cc: alsa-devel@alsa-project.org List-Id: alsa-devel@alsa-project.org At Fri, 22 Jul 2011 14:23:07 -0400, David Henderson wrote: > > [1 ] > On 07/13/2011 10:31 AM, Takashi Iwai wrote: > > At Wed, 13 Jul 2011 10:25:31 -0400, > > David Henderson wrote: > >> On 07/13/2011 10:08 AM, Takashi Iwai wrote: > >>> At Wed, 13 Jul 2011 09:14:55 -0400, > >>> David Henderson wrote: > >>>>> Thanks again for the help Takashi. Ok, I've created the > >>>>> /etc/asound.conf file with the appropriate group and now I'm trying to > >>>>> run the aplay binary and I'm not getting any error messages, but I'm > >>>>> also not hearing any sounds from the speakers. > >>>>> > >>>>> # aplay freq10-30000-10s.wav > >>>>> Playing WAVE 'freq10-30000-10s.wav' : Signed 16 bit Little Endian, > >>>>> Rate 44100 Hz, Mono > >>>>> > >>>>> # speaker-test -w ./freq10-30000-10s.wav > >>>>> > >>>>> speaker-test 1.0.23 > >>>>> > >>>>> Playback device is default > >>>>> Stream parameters are 48000Hz, S16_LE, 1 channels > >>>>> Using 16 octaves of pink noise > >>>>> Rate set to 48000Hz (requested 48000Hz) > >>>>> Buffer size range from 2048 to 8192 > >>>>> Period size range from 1024 to 1024 > >>>>> Using max buffer size 8192 > >>>>> Periods = 4 > >>>>> was set period_size = 1024 > >>>>> was set buffer_size = 8192 > >>>>> 0 - Front Left > >>>>> Time per period = 2.835792 > >>>>> 0 - Front Left > >>>>> Time per period = 2.986653 > >>>>> 0 - Front Left > >>>>> Time per period = 2.986654 > >>>>> 0 - Front Left > >>>>> ...snip... > >>>>> > >>>>> I've made sure nothing is muted with the audio hardware by using > >>>>> alsamixer and changed the permissions on the files within the /etc/snd > >>>>> directory. Any other thoughts? > >>>>> > >>>>> Dave > >>>> bump for help > >>> You didn't give any useful information about the hardware itself, so > >>> no one can answer. Did it ever sound correctly with any other distro > >>> at all? > >>> > >>> Please don't mix up the custom-build problem and the driver problem. > >>> The problem with silent output is more likely a driver issue (or a > >>> configuration issue). > >>> > >>> > >>> Takashi > >> The hardware is an integrated HDA Intel audio sound card. The > >> /proc/asound/pcm file has this listed: > >> > >> 00-00: STAC92xx Analog : STAC92xx Analog : playback 1 : capture 2 > >> 00-01: STAC92xx Digital : STAC92xx Digital : playback 1 > >> 00-03: INTEL HDMI 0 : INTEL HDMI 0 : playback 1 > > That's not enough. Which kernel / ALSA version, which model option? > > Could you alsa-info.sh output (run with --no-upload option)? > > This will give most of needed information. > > > >> Yes, this audio works just fine within Kubuntu. > > Do both run the same kernel version? > > > > At next, try to run "alsactl -f somefile store" on both systems, and > > compare the files. You may see some difference in mixer setup. > > > > > > Takashi > > I've searched the local fs for the alsa-info.sh script as well as > looking through the package contents on debian.org without any results. See Documentation/sound/alsa/HD-Audio.txt. Takashi