From: Takashi Iwai Subject: Re: hdsp oss emulation and sync Date: Wed, 29 Jun 2005 12:39:21 +0200 Message-ID: References: <42C17BBC.1070402@mur.at> <42C2782A.7060308@mur.at> Mime-Version: 1.0 (generated by SEMI 1.14.6 - "Maruoka") Content-Type: multipart/mixed; boundary="Multipart_Wed_Jun_29_12:39:21_2005-1" Return-path: In-Reply-To: <42C2782A.7060308@mur.at> Sender: alsa-devel-admin@lists.sourceforge.net Errors-To: alsa-devel-admin@lists.sourceforge.net List-Unsubscribe: , List-Post: List-Help: List-Subscribe: , List-Archive: To: Peter Plessas Cc: alsa-devel@lists.sourceforge.net List-Id: alsa-devel@alsa-project.org --Multipart_Wed_Jun_29_12:39:21_2005-1 Content-Type: text/plain; charset=US-ASCII At Wed, 29 Jun 2005 12:30:02 +0200, Peter Plessas wrote: > > Hi Takashi, List, > > Takashi Iwai wrote: > > > How doesn't it work? More detailed explanation please? > > I have the card synced as slave to my mixer. > I get the following error messages when starting f.e. pd or rezound: > > (all software also tested as root) > > pd -verbose -oss > device 1: tried /dev/midi READ/WRITE; returned 5 > opened 1 MIDI input device(s) and 1 MIDI output device(s). > input channels = 2, output channels = 2 > opened /dev/dsp for reading and writing > > error: OSS: SNDCTL_DSP_CHANNELS failed /dev/dsp > opened audio output on /dev/dsp; got 0 channels > opened /dev/dsp for reading only > > error: OSS: SNDCTL_DSP_CHANNELS failed /dev/dsp > opened audio input device /dev/dsp; got 0 channels > > > rezound > Error occurred while initializing audio output method 'oss' -- virtual > void COSSSoundPlayer::initialize() -- error setting the format -- > Operation not permitted > > In both cases dmesg gives: > > Jun 29 12:31:49 bigh kernel: No AutoSync source for requested rate > > But my rate in pd and of the external source is both 44.1k OSS always opens the device with the default sample rate 8000HZ. It looks like the hdsp driver doesn't accept this rate in the external sync mode. > > As i switch the card to sync master, these apps do fine. > > > Well, it's hard to debug without error details... > > Where else can i look for meaningful messages? So far, so good. Could you try the patch below? This will add "Sample Clock Source Locking" mixer element. Enabling this switch may fix your problem above. You can turn this on via alsamixer or amixer. Takashi --Multipart_Wed_Jun_29_12:39:21_2005-1 Content-Type: text/plain; charset=US-ASCII Index: alsa-kernel/pci/rme9652/hdsp.c =================================================================== RCS file: /home/iwai/cvs/alsa/alsa-kernel/pci/rme9652/hdsp.c,v retrieving revision 1.90 diff -u -r1.90 hdsp.c --- alsa-kernel/pci/rme9652/hdsp.c 30 May 2005 17:19:18 -0000 1.90 +++ alsa-kernel/pci/rme9652/hdsp.c 29 Jun 2005 10:38:38 -0000 @@ -445,6 +445,7 @@ u32 control2_register; /* cached value */ u32 creg_spdif; u32 creg_spdif_stream; + int clock_source_locked; char *card_name; /* digiface/multiface */ HDSP_IO_Type io_type; /* ditto, but for code use */ unsigned short firmware_rev; @@ -2086,7 +2087,7 @@ if (val > 6) val = 6; } spin_lock_irq(&hdsp->lock); - if (val != hdsp_clock_source(hdsp)) { + if (val != hdsp_clock_source(hdsp) && ! hdsp->clock_source_locked) { change = (hdsp_set_clock_source(hdsp, val) == 0) ? 1 : 0; } else { change = 0; @@ -2095,6 +2096,34 @@ return change; } +static int snd_hdsp_info_clock_source_lock(snd_kcontrol_t *kcontrol, snd_ctl_elem_info_t * uinfo) +{ + uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN; + uinfo->count = 1; + uinfo->value.integer.min = 0; + uinfo->value.integer.max = 1; + return 0; +} + +static int snd_hdsp_get_clock_source_lock(snd_kcontrol_t * kcontrol, snd_ctl_elem_value_t * ucontrol) +{ + hdsp_t *hdsp = snd_kcontrol_chip(kcontrol); + + ucontrol->value.integer.value[0] = hdsp->clock_source_locked; + return 0; +} + +static int snd_hdsp_put_clock_source_lock(snd_kcontrol_t * kcontrol, snd_ctl_elem_value_t * ucontrol) +{ + hdsp_t *hdsp = snd_kcontrol_chip(kcontrol); + int change; + + change = (int)ucontrol->value.integer.value[0] != hdsp->clock_source_locked; + if (change) + hdsp->clock_source_locked = ucontrol->value.integer.value[0]; + return change; +} + #define HDSP_DA_GAIN(xname, xindex) \ { .iface = SNDRV_CTL_ELEM_IFACE_HWDEP, \ .name = xname, \ @@ -3117,6 +3146,15 @@ HDSP_SPDIF_NON_AUDIO("IEC958 Non-audio Bit", 0), /* 'Sample Clock Source' complies with the alsa control naming scheme */ HDSP_CLOCK_SOURCE("Sample Clock Source", 0), +{ + /* FIXME: should be PCM or MIXER? */ + /* .iface = SNDRV_CTL_ELEM_IFACE_PCM, */ + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .name = "Sample Clock Source Locking", + .info = snd_hdsp_info_clock_source_lock, + .get = snd_hdsp_get_clock_source_lock, + .put = snd_hdsp_put_clock_source_lock, +}, HDSP_SYSTEM_CLOCK_MODE("System Clock Mode", 0), HDSP_PREF_SYNC_REF("Preferred Sync Reference", 0), HDSP_AUTOSYNC_REF("AutoSync Reference", 0), @@ -3349,6 +3387,7 @@ snd_iprintf (buffer, "System Clock Mode: %s\n", system_clock_mode); snd_iprintf (buffer, "System Clock Frequency: %d\n", hdsp->system_sample_rate); + snd_iprintf (buffer, "System Clock Locked: %s\n", hdsp->clock_source_locked ? "Yes" : "No"); snd_iprintf(buffer, "\n"); @@ -3853,13 +3892,14 @@ */ spin_lock_irq(&hdsp->lock); - if ((err = hdsp_set_rate(hdsp, params_rate(params), 0)) < 0) { - spin_unlock_irq(&hdsp->lock); - _snd_pcm_hw_param_setempty(params, SNDRV_PCM_HW_PARAM_RATE); - return err; - } else { - spin_unlock_irq(&hdsp->lock); + if (! hdsp->clock_source_locked) { + if ((err = hdsp_set_rate(hdsp, params_rate(params), 0)) < 0) { + spin_unlock_irq(&hdsp->lock); + _snd_pcm_hw_param_setempty(params, SNDRV_PCM_HW_PARAM_RATE); + return err; + } } + spin_unlock_irq(&hdsp->lock); if ((err = hdsp_set_interrupt_interval(hdsp, params_period_size(params))) < 0) { _snd_pcm_hw_param_setempty(params, SNDRV_PCM_HW_PARAM_PERIOD_SIZE); @@ -4284,13 +4324,17 @@ snd_pcm_hw_constraint_msbits(runtime, 0, 32, 24); snd_pcm_hw_constraint_list(runtime, 0, SNDRV_PCM_HW_PARAM_PERIOD_SIZE, &hdsp_hw_constraints_period_sizes); - if (hdsp->io_type == H9632) { - runtime->hw.channels_min = hdsp->qs_out_channels; - runtime->hw.channels_max = hdsp->ss_out_channels; + if (hdsp->clock_source_locked) { + runtime->hw.rate_min = runtime->hw.rate_max = hdsp->system_sample_rate; + } else if (hdsp->io_type == H9632) { runtime->hw.rate_max = 192000; runtime->hw.rates = SNDRV_PCM_RATE_KNOT; snd_pcm_hw_constraint_list(runtime, 0, SNDRV_PCM_HW_PARAM_RATE, &hdsp_hw_constraints_9632_sample_rates); } + if (hdsp->io_type == H9632) { + runtime->hw.channels_min = hdsp->qs_out_channels; + runtime->hw.channels_max = hdsp->ss_out_channels; + } snd_pcm_hw_rule_add(runtime, 0, SNDRV_PCM_HW_PARAM_CHANNELS, snd_hdsp_hw_rule_out_channels, hdsp, --Multipart_Wed_Jun_29_12:39:21_2005-1-- ------------------------------------------------------- SF.Net email is sponsored by: Discover Easy Linux Migration Strategies from IBM. Find simple to follow Roadmaps, straightforward articles, informative Webcasts and more! Get everything you need to get up to speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click