From: Takashi Iwai Subject: Re: model needed for Clevo P150HM (Realtek ALC892) Date: Fri, 01 Jul 2011 09:32:45 +0200 Message-ID: References: <4E036C8F.3080709@gmail.com> <4E047441.4010003@gmail.com> <4E05C1B1.50302@gmail.com> <4E05C704.4080806@gmail.com> <4E05CE02.1070801@gmail.com> <4E082166.5060902@gmail.com> <4E08E33D.3060608@gmail.com> <4E0B62B6.6000007@gmail.com> <4E0B6BE0.1010003@gmail.com> <4E0B7D22.3040009@gmail.com> <4E0C17F2.5070704@gmail.com> <4E0CABBC.3070801@gmail.com> <4E0CBBED.9050501@gmail.com> <4E0CD984.9050408@gmail.com> Mime-Version: 1.0 (generated by SEMI 1.14.6 - "Maruoka") Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: Received: from mx2.suse.de (cantor2.suse.de [195.135.220.15]) by alsa0.perex.cz (Postfix) with ESMTP id 6A8C510393B for ; Fri, 1 Jul 2011 09:32:48 +0200 (CEST) In-Reply-To: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: alsa-devel-bounces@alsa-project.org Errors-To: alsa-devel-bounces@alsa-project.org To: Julian Sikorski Cc: alsa-devel@alsa-project.org List-Id: alsa-devel@alsa-project.org At Fri, 01 Jul 2011 07:21:34 +0200, Takashi Iwai wrote: > > At Thu, 30 Jun 2011 22:16:04 +0200, > Julian Sikorski wrote: > > > > It works, thanks! In more detail, the Speaker/Headphone situation is > > back to 2.6.38 state - you can regulate them independently, but muting > > one mutes the other. LFE/Center and Surround keep working correctly too. > > The new output of alsa-info.sh: > > http://www.alsa-project.org/db/?f=45bc0df9747371b348bde6c4aa508b2ba44aff47 > > Right, it's because ALC892 has no mute-control in pin widgets but > only in the mixer widget. And HP and speaker paths share the same > mixer, thus it's impossible to mute independently. I seem to have lied. It should be possible, and the emulator shows it must be working well. Do I understand correctly that the problem is that both HP and speaker outputs are muted simultaneously when you either of "Headphone" or "Speaker" mixer switch is muted? If so, please give alsa-info.sh outputs at the problematic state, i.e. the speaker gets muted by the headphone mixer switch or vice versa, just to confirm. thanks, Takashi