From: Takashi Iwai Subject: Re: NULL pointer dereference Date: Tue, 21 Jun 2005 10:27:17 +0200 Message-ID: References: <20050620123344.GA20286@blackmilk.localzone.fr> <20050620214931.GA14357@blackmilk.localzone.fr> Mime-Version: 1.0 (generated by SEMI 1.14.6 - "Maruoka") Content-Type: text/plain; charset=US-ASCII Return-path: In-Reply-To: <20050620214931.GA14357@blackmilk.localzone.fr> Sender: alsa-devel-admin@lists.sourceforge.net Errors-To: alsa-devel-admin@lists.sourceforge.net List-Unsubscribe: , List-Post: List-Help: List-Subscribe: , List-Archive: To: fab Cc: alsa-devel@lists.sourceforge.net List-Id: alsa-devel@alsa-project.org At Mon, 20 Jun 2005 23:49:31 +0200, fab wrote: > > On 20/06/05 20:30 +0200, Takashi Iwai wrote: > > At Mon, 20 Jun 2005 19:26:13 +0200, > > ?$B;d wrote: > > > > > > At Mon, 20 Jun 2005 14:33:44 +0200, > > > fab wrote: > > > > > > > > Hi, > > > > testing the latest cvs version to see if I can make the internal speaker > > > > working as in realtek's drivers (after having upgraded my kernel), I got it > > > > (and I get it as soon as I load the sound module): > > > > > > Looks like the new code I added for auto-probing is buggy. > > > As a workaround, pass model=asus option unless it's fixed. > > > > ... or try the patch below. > > Ok, after having applied the patch everything is weired, it works even > worse than before :( Might be. Without model parameter, the experimental auto-configuration will be selected. > If I pass card=foo with "foo" being a quite old card type, I get less or > more the same effect as before (badly working). You have to pass "model" parameter, not card. > With a new "foo" (z71v, asus, etc...) or no param at all, I get > something like: > hda_codec: Unknown model for ALC880, trying auto-probe from BIOS... > > Then, If I run "alsamixer" It fails: > alsamixer: function snd_mixer_load failed: Invalid argument Is it CVS version? Might be safer to use alsa-lib/alsa-utils latest 1.0.9x release right now since the mixer stuff is being changed greatly. > and the kernel prints: > hda_codec: num_steps = 0 for NID=0x9 > > Hope this helps. > Fabien Devaux. > > PS: it works like a charm in realtek's version, have you really applied > all the changes ? The source is there, you can check it by yourself :) > should I pass a specific model= argument ? The entry for your device seems just missing. Give me the output of lspci -nv. Takashi ------------------------------------------------------- SF.Net email is sponsored by: Discover Easy Linux Migration Strategies from IBM. Find simple to follow Roadmaps, straightforward articles, informative Webcasts and more! Get everything you need to get up to speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click