From: Takashi Iwai Subject: Re: EMU-1212m "no Audiodock - no firmware" patch Date: Thu, 22 Nov 2012 18:17:25 +0100 Message-ID: References: <50AD5347.5040003@ya.ru> Mime-Version: 1.0 (generated by SEMI 1.14.6 - "Maruoka") Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: Received: from mx2.suse.de (cantor2.suse.de [195.135.220.15]) by alsa0.perex.cz (Postfix) with ESMTP id C77F4260727 for ; Thu, 22 Nov 2012 18:17:25 +0100 (CET) In-Reply-To: <50AD5347.5040003@ya.ru> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: alsa-devel-bounces@alsa-project.org Sender: alsa-devel-bounces@alsa-project.org To: oeai@ya.ru Cc: alsa-devel@alsa-project.org List-Id: alsa-devel@alsa-project.org At Thu, 22 Nov 2012 02:18:47 +0400, oeai wrote: > > Aloha! > > i've been posting about my problem earlier, but i decided to DIY > > the problem was that when going up from suspend the firmware for > additional card (that i don't have) was trying to load, > -but there's no card > - sorry, i'm gonna check few more thousand times > that caused my cpu to load insanely Right now I fixed a few bugs regarding the firmware loading. It should have been improved by that. Take a look at my recent posts [PATCH 7/8] ALSA: emu10k1: cache emu1010 firmware and [PATCH 8/8] ALSA: emu10k1: don't update firmware during suspend/resume > so in the patch i've changed few more strings for debugging > > but actually the one (but not the only) bug > is here > > *** 728,739 **** > > ! if (reg & EMU_HANA_OPTION_DOCK_OFFLINE) { > > --- 729,740 ---- > > ! if (reg & !EMU_HANA_OPTION_DOCK_OFFLINE) { > > the thing is in the "!"EMU_HANA_OPTION_DOCK_OFFLINE -> then the firmware should be loaded. > > and to debug some errors if something i've put the one more else state so if no audiodock - it could continue to load config > > *** 777,784 **** > /* Unmute all. Default is muted after a firmware load */ > snd_emu1010_fpga_write(emu, EMU_HANA_UNMUTE, EMU_UNMUTE); > } > } > ! snd_printk(KERN_INFO "emu1010: firmware thread stopping\n"); > return 0; > } > > --- 778,790 ---- > /* Unmute all. Default is muted after a firmware load */ > snd_emu1010_fpga_write(emu, EMU_HANA_UNMUTE, EMU_UNMUTE); > } > + else if ((reg & 0x3f) == 0x15) > + { > + snd_printk(KERN_INFO "emu1212m: trying to load config emu_hana_fpga_config"); > + snd_emu1010_fpga_write(emu, EMU_HANA_FPGA_CONFIG,0x02); > + } > } > ! snd_printk(KERN_INFO "emu1010: emu dock firmware thread stopping\n"); > return 0; > } > > *************** > > then i've commented the power_down for audiodock - it should be in other place, but as i'm 1212m user - it works for me - you know. > > > *** 841,847 **** > outl(0x0005a000, emu->port + HCFG); > > /* Disable 48Volt power to Audio Dock */ > ! snd_emu1010_fpga_write(emu, EMU_HANA_DOCK_PWR, 0); > > /* ID, should read & 0x7f = 0x55. (Bit 7 is the IRQ bit) */ > snd_emu1010_fpga_read(emu, EMU_HANA_ID, ®); > --- 847,853 ---- > outl(0x0005a000, emu->port + HCFG); > > /* Disable 48Volt power to Audio Dock */ > ! /*snd_emu1010_fpga_write(emu, EMU_HANA_DOCK_PWR, 0);*/ > > /* ID, should read & 0x7f = 0x55. (Bit 7 is the IRQ bit) */ > snd_emu1010_fpga_read(emu, EMU_HANA_ID, ®); > *************** Hmm. It's because you have no dock? What happens if you don't change this? > and here i've changed that the emu_model was firstly enabled and then ecard - since i don't know what's the ecard i thought that it is a second module of my emu card. This should be harmless. ecard is set only to Emu APS card, and exclusive with EMU 1x1x & co. What are other essentially required changes? Do both Emu1010b and Emu1212 have the same PCI SSID? That sucks. I see you set ca_cardbus_chip=1 in the card entry. Is it mandatory? Last but not least, please use "diff -up" for creating a patch in the unified diff format. thanks, Takashi