From: Takashi Iwai Subject: Re: Multistreaming Playback using Front Panel Headphone with realtek codec Date: Mon, 09 May 2011 14:13:08 +0200 Message-ID: References: Mime-Version: 1.0 (generated by SEMI 1.14.6 - "Maruoka") Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: Received: from mx1.suse.de (cantor.suse.de [195.135.220.2]) by alsa0.perex.cz (Postfix) with ESMTP id D255D24154 for ; Mon, 9 May 2011 14:13:08 +0200 (CEST) In-Reply-To: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: alsa-devel-bounces@alsa-project.org Errors-To: alsa-devel-bounces@alsa-project.org To: Raymond Yau Cc: ALSA Development Mailing List List-Id: alsa-devel@alsa-project.org At Sat, 7 May 2011 11:48:19 +0800, Raymond Yau wrote: > > 2011/5/6 Takashi Iwai > > > > > > > > > Use "Independent HP" just because patch_via.c already used it so it is > > > better to use a standard name for all hda codecs > > > > Yeah, I know. But this name is confusing, so better to change in > > patch_via.c as well. > > > > > > Takashi > > > > To force pulseaudio to get the correct subdevice for via codec, you may need > to add "subdevice 0" to HDA-intel.conf > > since subdevice 0 support multichannel but subdevice 1 only support stereo > > > playback.pcm { > type softvol > slave.pcm { > type hw > card $CARD > + subdevice 0 > } > control { > name "PCM Playback Volume" > card $CARD > } > } OK, fixed now. Thanks. Takashi