From: Takashi Iwai Subject: Re: Intel-HDA ALC262 (again) Date: Thu, 23 Aug 2007 16:28:54 +0200 Message-ID: References: <38511.12091.qm@web27202.mail.ukl.yahoo.com> Mime-Version: 1.0 (generated by SEMI 1.14.6 - "Maruoka") Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: Received: from mx2.suse.de (ns2.suse.de [195.135.220.15]) by alsa0.perex.cz (Postfix) with ESMTP id C3964103867 for ; Thu, 23 Aug 2007 16:28:54 +0200 (CEST) In-Reply-To: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: alsa-devel-bounces@alsa-project.org Errors-To: alsa-devel-bounces@alsa-project.org To: Andy Cc: alsa-devel@alsa-project.org List-Id: alsa-devel@alsa-project.org At Thu, 23 Aug 2007 00:03:18 +0200, I wrote: > > At Wed, 22 Aug 2007 20:59:36 +0100 (BST), > Andy wrote: > > > > Alas, I spoke too soon. The headphone jack and > > internal speakers work as expected, until I adjust the > > main volume (labeled in alsamixer as 'front') at which > > point both the internal speakers and headphones play! > > > > > > Unplugging the headphones and reconnecting them makes > > everything OK again. > > > > Any ideas? (patch against 2.6.22 that makes my chip > > mostly work is attached). I guess that > > alc262_hippo_automute() needs to be called somewhere > > it isn't, but I couldn't see where. > > Ah, that's because the front (actually it should be master) control > changes the both AMP values. It should change only the HP amp and > call alc262_hippo_automute() appropriately. > > I'll fix this later. ... and committed to HG tree. Please give it a try. Takashi