From: Takashi Iwai Subject: Re: PROBLEM: Internal microphone (& combined headset jack, in default config) not working on Acer VN7-592G (Skylake) Date: Fri, 13 Jan 2017 12:36:52 +0100 Message-ID: References: <990a87bf-735b-d978-b6ba-74bb7a65a244@ralfj.de> Mime-Version: 1.0 (generated by SEMI 1.14.6 - "Maruoka") Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: Received: from mx2.suse.de (mx2.suse.de [195.135.220.15]) by alsa0.perex.cz (Postfix) with ESMTP id 78B622676CC for ; Fri, 13 Jan 2017 12:36:53 +0100 (CET) In-Reply-To: <990a87bf-735b-d978-b6ba-74bb7a65a244@ralfj.de> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: alsa-devel-bounces@alsa-project.org Sender: alsa-devel-bounces@alsa-project.org To: Ralf Jung Cc: alsa-devel@alsa-project.org List-Id: alsa-devel@alsa-project.org On Thu, 12 Jan 2017 13:23:54 +0100, Ralf Jung wrote: > > Hi all, > > (This is my first bugreport to a mailing list, so I hope I'm filling out > everything properly here...) > > [1.] Internal microphone (& combined headset jack, in default config) > not working on Acer VN7-592G (Skylake) > [2.] > The internal microphone of my new laptop, an Acer Aspire V Nitro Black > Edition (VN7-592G) with Skylake, is not working. The machine has a > single "headset" jack which is supposed to support both speakers, > microphones, and "combined jacks" that carry both audio-in and audio-out > (like they are common on smartphones). > Without any further configuration, the jack works only for external > speakers. A plugged-in microphone doesn't seem to do anything, for a > combined headset (i.e. sth. with both microphone and speaker in one > jack), only the speaker part works. I tried all combinations of > settings in pavucontrol, i.e., "Speakers" (that's the internal ones) vs. > "Headphones" for audio output and "Microphone" vs. "Headset Microhpone" > for the audio input. > > I was able to improve the situation by adding this to modprobe.d: > options snd-hda-intel model=dell-headset-multi > Now, mics and external speakers plugged in work fine (where for mics, I > need to manually configure them in pacuvontrol: "Speakers" and > "Microphone"). Combined headsets also work (with "Headphones" and > "Headset Microphone"), i.e. I get audio in and audio out, but the audio > in from the microphone is fairly noisy. I am not sure whether this is > due to the headset or the laptop; I am using the same headset with my > phone and people I called did not complain about noise. > Furthermore, there is a weird effect: I have a headset with *separate* > plugs for speaker and mic (which I used above to test the speaker vs. > mic functionality). If I plug in the speaker part, but configure it as > a microhpone (out: "Speakers", in: "Microphone"), then I actually get a > (rather noisy) input signal. Not sure what is going on there, but I'm > reasonably sure it is getting that signal from the headset, not the > internal mic of the laptop. It's a configuration with "headphone mic" for Dell, so it doesn't fit with yours properly. Look at the lspci -nv output, and check the PCI SSID of the corresponding device. Then try to add an entry applying some fixup, e.g. ALC269_FIXUP_ASPIRE_HEADSET_MIC, in alc269_fixup_tbl[] defined in sound/pci/hda/patch_realtek.c: static const struct snd_pci_quirk alc269_fixup_tbl[] = { ..... SND_PCI_QUIRK(0x1025, XXXX, "Acer Your Model", ALC269_FIXUP_ASPIRE_HEADSET_MIC), ..... There are other definitions for 1025:*, so put your own one there. The list is sorted in the id number order. There are quite lots of fixup models that can be applied, do figure out by trial-and-error. HTH, Takashi