From: Takashi Iwai Subject: Re: How to redefine "default" to be equivalent to "sysdefault"? Date: Mon, 18 Jun 2012 15:45:50 +0200 Message-ID: References: <1339574254.2909.15.camel@laptop> Mime-Version: 1.0 (generated by SEMI 1.14.6 - "Maruoka") Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: Received: from mx2.suse.de (cantor2.suse.de [195.135.220.15]) by alsa0.perex.cz (Postfix) with ESMTP id B69D424330 for ; Mon, 18 Jun 2012 15:45:51 +0200 (CEST) In-Reply-To: <1339574254.2909.15.camel@laptop> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: alsa-devel-bounces@alsa-project.org Errors-To: alsa-devel-bounces@alsa-project.org To: Tanu Kaskinen Cc: alsa-devel List-Id: alsa-devel@alsa-project.org At Wed, 13 Jun 2012 10:57:34 +0300, Tanu Kaskinen wrote: > > Hi, > > I have a file with the following contents: > > > > # This file an alsa configuration file, used by pasuspender to make the > # "default" Alsa device work while PulseAudio is in suspended state. > > # Include the system configuration first. Is there any easier way to do this? > # 14 lines for including one file is a bit much... > @hooks [ > { > func load > files [ > { > @func concat > strings [ > { @func datadir } > "/alsa.conf" > ] > } > ] > } > ] > > # Redefine "default" to be the same as "sysdefault". On most systems > # "sysdefault" is configured to use dmix. > pcm.!default sysdefault > > > > That doesn't do what I want it to do. When I run > > ALSA_CONFIG_PATH=/path/to/file.conf aplay -Ddefault ~/test.wav Doesn't ALSA_CONFIG_PATH=/path/to/file.conf:/usr/share/alsa/alsa.conf work? $ALSA_CONFIG_PATH overrides the whole default paths, so it doesn't include even sysdefault definition unless you specify multiple paths. Takashi > > aplay still uses pulseaudio. Using "-Dsysdefault" instead of "-Ddefault" > doesn't use pulseaudio, so "sysdefault" does what it's supposed to do. > The problem is then: why doesn't "default" behave the same way as > "sysdefault"? > > What error did I make? > > Below is "aplay -L" output with and without setting the environment > variable. When the environment variable is set, "default" is listed > twice, and "null" and "pulse" are included in the list while they are > not included in the list when running aplay without the environment > variable. What causes those differences? > > > > > ALSA_CONFIG_PATH=/path/to/file.conf aplay -L > default > Playback/recording through the PulseAudio sound server > null > Discard all samples (playback) or generate zero samples (capture) > pulse > Playback/recording through the PulseAudio sound server > default > Playback/recording through the PulseAudio sound server > sysdefault:CARD=Intel > HDA Intel, AD198x Analog > Default Audio Device > front:CARD=Intel,DEV=0 > HDA Intel, AD198x Analog > Front speakers > surround40:CARD=Intel,DEV=0 > HDA Intel, AD198x Analog > 4.0 Surround output to Front and Rear speakers > surround41:CARD=Intel,DEV=0 > HDA Intel, AD198x Analog > 4.1 Surround output to Front, Rear and Subwoofer speakers > surround50:CARD=Intel,DEV=0 > HDA Intel, AD198x Analog > 5.0 Surround output to Front, Center and Rear speakers > surround51:CARD=Intel,DEV=0 > HDA Intel, AD198x Analog > 5.1 Surround output to Front, Center, Rear and Subwoofer speakers > surround71:CARD=Intel,DEV=0 > HDA Intel, AD198x Analog > 7.1 Surround output to Front, Center, Side, Rear and Woofer speakers > iec958:CARD=Intel,DEV=0 > HDA Intel, AD198x Digital > IEC958 (S/PDIF) Digital Audio Output > > > > > aplay -L > default > Playback/recording through the PulseAudio sound server > sysdefault:CARD=Intel > HDA Intel, AD198x Analog > Default Audio Device > front:CARD=Intel,DEV=0 > HDA Intel, AD198x Analog > Front speakers > surround40:CARD=Intel,DEV=0 > HDA Intel, AD198x Analog > 4.0 Surround output to Front and Rear speakers > surround41:CARD=Intel,DEV=0 > HDA Intel, AD198x Analog > 4.1 Surround output to Front, Rear and Subwoofer speakers > surround50:CARD=Intel,DEV=0 > HDA Intel, AD198x Analog > 5.0 Surround output to Front, Center and Rear speakers > surround51:CARD=Intel,DEV=0 > HDA Intel, AD198x Analog > 5.1 Surround output to Front, Center, Rear and Subwoofer speakers > surround71:CARD=Intel,DEV=0 > HDA Intel, AD198x Analog > 7.1 Surround output to Front, Center, Side, Rear and Woofer speakers > iec958:CARD=Intel,DEV=0 > HDA Intel, AD198x Digital > IEC958 (S/PDIF) Digital Audio Output > > -- > Tanu > > _______________________________________________ > Alsa-devel mailing list > Alsa-devel@alsa-project.org > http://mailman.alsa-project.org/mailman/listinfo/alsa-devel >